Best Water Cooling Temp Sensor

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

The new temperature sensor from Phobya with g1/4″ inner thread and G1/4″ outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it’s low height of only 11,6mm (without threads) allows it to fit below almost any connector. The sensor cable is equipped with a standard 2-Pin plug. High-Flow, no narrowing of the cooling channel inside of the sensor! Also see example of installation. This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.

Model: 71227

Barrow G1/4″ 10K Temperature Sensor Stop Fitting, Black

Model: TCWD-V1

XSPC G1/4″ plug with built in temperature sensor

Model: 5060175584168

This temperature sensor is equipped with a G1/4″ inner- and a G1/4″ outer thread and can therefore be integrated easily even directly on a waterblock or radiator. The sensor is equipped with a 60cm long cable and has a two-pin plug for connection.

Model: 53067

Thermaltake Pacific TF1 temperature and flow indicator is a 2-in-1 design, the indicator detects coolant temperatures ranging from 0 degree to 99 Degree (32 Degree -210 Degree) and displays the value in unit Celsius or Fahrenheit. Featuring temperature and low-flow warning alert, compatibility with any G1/4 fittings and easy installation, The gadget ensures the liquid cooling system to work within optimal temperature and flow operating ranges and unleashes the performance of your PC.

Dimension: 35.5 H x 44.6 W x 60 L (mm)
Weight: 100 g
Material: Copper + ABS
Rated Voltage: 5V
Power Input: 0.4W
Screw Thread: G 1/4
Connector: SATA Power

Warranty: 2 Years

Every item in the Original Engine Management program is tested to conform to original equipment quality form, fit, and function.

Engine Coolant Cooling Temperature Temp Sensor Sender

An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is the high quality replacement ideal for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Has a cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, graphics card cooler or CPU cooler with the AG adapter included in delivery. Installing it close to a reservoir is also no problem. Simply remove the AG adapter and attach a connector to the G1/4” threads on either end, and you’re good to go. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen Temperature sensor G1/4 inner/inner with AG Adapter – Chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

Conclusion

By our suggestions above, we hope that you can found water cooling temp sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!