infratechplus 
Nowadays, there are so many products of universal refrigerator relay 3 in 1 in the market and you are wondering to choose a best one. You have searched for universal refrigerator relay 3 in 1 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings universal refrigerator relay 3 in 1 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Wadoy RCO410 3 in 1 Compressor Hard Start Capacitor Kit For Refrigerators & Freezers 1/4-1/3 H.P. 115VAC (1)
- Replacement for model No. RCO410 (HS410)
- For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
- Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
- Extremely durable,long lasting refrigerators and freesers and easy to install
- Non-original aftermarket part
Specifications
●Replacement for model No. RCO410 (HS410)
●For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
●Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
●Extremely durable,long lasting refrigerators and freesers and easy to install
Installation Instructions
1. Disconnect power supply.
2. Remove old relay and overload.
3.Push terminal connected to white wire on RCO onto start terminal of compessor.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5.Push terminal connected to black wore on RCO onto common terminal of compressor.
6.Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.
7.Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.
Raven RCO410 3 in 1 Compressor Hard Start Capacitor Kit for Refrigerators & Freezers 1/4-1/3 H.P. 115VAC
- ✅ CONTENTS: 1 Compressor hard start capacitor and 2 wire nuts
- ✅ COMPATIBILITY: Use it for compressor sizes 1/4 to 1/3. Part RCO-410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers. Replaces parts number RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410
- ✅ PERFORMANCE: It’s a combination overload, capacitator and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation
- ✅ 100% MONEYBACK GUARANTEE: We offer 90 days return and 365 days replace (at no charge) after the date of original purchase for risk-free purchase
A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill.
For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.
Fits Several Compressor Types
Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.
Installation Instructions
1. Disconnect power supply. 2. Remove old relay and overload.
3. Push terminal connected to white wire on RCO onto start terminal of compressor. 4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5. Push terminal connected to black wore on RCO onto common terminal of compressor. 6. Connect one-line wire which was removed from old relay to one of the line wires of the RCO, using wire nut.
7. Connect other line wire which was removed from the old Overload to other line wire of the RCO, using wire nut.
RCO210 3 in 1 Hard Start Capacitor Replacement Compatible with Supco Relay Overload 1/12 hp- 1/2 hp Compressors Voltage-115VAC
- RCO210 – RSC Series Solid State Relay Overload & Start Capacitor Combination Compatible with Supco
- For compressor sizes 1/12 HP through 1/2 HP. Voltage-115VAC
- Replaces all 3 electrical components – relay, overloard and start capacitor on all capillary systems.
- The 3 n’1 Start Relay adds new life to old refrigerators and freezers by providing an additional boost to the compressor
- This product is not original part,The replacement parts come with 90 days warranty. For any reason you are not completely satisfied, please feel free to contact us for a replacement or full refund.
Specifications
●Replacement for model No. RCO210
●Applications One size for all compressors from 1/12 hp through 1/2 hp.
●Maximum RLA 13.3 Amps
●Mounting: Quick Connect HP RATING – 1/2
●Solid-state Hard-start Relay, includes relay, overload, and start capacitor.
●Provides a boost for hard start and unbalanced systems
●Prevents low voltage starting problems
●No additional wires required
●Used For domestic and commercial refrigeration systems and freezers
Installation Instructions
1. Disconnect power supply.
2. Remove old relay and overload.
3. Push terminal connected to white wire on RCO onto start terminal of compessor.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5. Push terminal connected to black wore on RCO onto common terminal of compressor.
6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.
7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.
3 In 1 Hard Start Kit for Refrigerator Relay Capacitor Overload RCO810
- Replacement OEM Part: RCO810
- This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5. 110 to 125VAC. Totally pre-wired
- Solid state relay and overload start capacitor. Replaces 3 electrical components. Works on domestic and commercial refrigerators.
- All Our Parts Are Factory Approved For A Proper Fit
- This is the non-original aftermarket parts
HQRP 4 Pin Universal Refrigerator Freezer Compressor PTC Start Relay Starter IC-4 Replacement plus HQRP Coaster
- HQRP®
- Refrigerator Freezer Compressor PTC Start Relay / Starter plus HQRP®
- Coaster
- This relay replaces 1, 2, 3 or 4 wire connectors relay. Product Name: IC-4 Start Relay
- Material: Plastic
- Resistance : 12-100Ohm
- Current : 3.5-10A
- Voltage : 450V Max
- Pin Quantity: 4
- Easy to install
- 200 days warranty!
Compatible with many Admiral / Amana / Danby / EdgeStar / Frigidaire / GE / Gibson / Haier / Igloo / Jenn-Air / Kenmore / KitchenAid / LG / Magic Chef / Maytag / Norge / Roper / Samsung / Summit / Vinotemp / Vissani / Whirlpool Refrigerator Freezer Models.
HQRP 2-Pack 4 Pin Universal Refrigerator Freezer Compressor PTC Start Relays Starter IC-4 Replacement plus HQRP Coaster
- HQRP®
- 2-Pack Refrigerator Freezer Compressor PTC Start Relays / Starter plus HQRP®
- Coaster
- This relay replaces 1, 2, 3 or 4 wire connectors relay. Product Name: IC-4 Start Relay
- Material: Plastic
- Resistance : 12-100Ohm
- Current : 3.5-10A
- Voltage : 450V Max
- Pin Quantity: 4
- Easy to install
- 200 days warranty!
Compatible with many Admiral / Amana / Danby / EdgeStar / Frigidaire / GE / Gibson / Haier / Igloo / Jenn-Air / Kenmore / KitchenAid / LG / Magic Chef / Maytag / Norge / Roper / Samsung / Summit / Vinotemp / Vissani / Whirlpool Refrigerator Freezer Models.
Podoy RCO810 3 N’ 1 Start Hard Start Kit for Refrigerator Freezers Replacement
- This compressor hard start compacitor kit is for refrigerators
- This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5. 110 to 125VAC. Totally pre-wired
- Solid state relay and overload start capacitor. Replaces 3 electrical components. Works on domestic and commercial refrigerators. Fits 1/12 – 1/10 – 1/8 – 1/6 – 1/5 H.P. compressors
- Package includes: pls see the image
- This is the non-original aftermarket parts
Product details:
RCO810 3 n’ 1 start capacitor for refrigerators freezers
3 in 1 start kit for compressors sizes 1/12 through 1/5 HP, 115V. This kit includes relay, capacitor, and overload device, pre-wired. This kit will replace all 3 electrical components on capillary refrigeration systems. For newer systems with a run capacitor use TJ90URCO810. For larger horsepower compressors use TJ90RCO410
Extremely durable,long lasting refrigerators and freesers and easy to install
This is the non-original aftermarket parts
ICM Controls UMSR-50 Universal Motor Starting Relay, 50 Amp, Patented Differential Voltage Sensing, Voltage Rating 110V – 270V AC, Single Phase (Maximum Voltage Contact Rating 502V AC)
RCO410 Hard Start Kit 3 On 1 Relay Overload Capacitor Kit for Compressors
- Manufactured by Supco
- 3 In 1 Hard Start Kit RCO410 replaces the following parts: TJ90RCO410 AP4503017 replaces 600-410, ERP410, HS410, RC0410, RCO-410, RCO410
- Color coded for easy installation
- Universal hard start kit.
- Overload, capacitor, relay, wire nuts, all in one piece.
3 In 1 Hard start kit RCO410 replaces all 3 electrical components on capillary refrigeration systems. It works with all up to 1/4″ compressors horse power. Design to work on most refrigerators. Specifications Color coded for easy installation Universal hard start kit. Overload, capacitor, relay, wire nuts, all in one piece. 3 In 1 Hard Start Kit RCO410 replaces the following parts: TJ90RCO410 AP4503017 replaces 600-410, ERP410, HS410, RC0410, RCO-410, RCO410 Non OEM part
Conclusion
By our suggestions above, we hope that you can found universal refrigerator relay 3 in 1 for you.Please don’t forget to share your experience by comment in this post. Thank you!
