Which Is The Best Tanklesss Natural Gas Hot Water Heater

No electricity required! Marey Power Gas 10L Digital Panel Tankless Water Heater delivers endless hot water with optimal energy efficiency! It’s simple to install and includes auto ignition. Energy-saving design heats up in seconds and uses gas only while water is flowing. Available in LP and natural gas models. Adjustable gas and water control knobs. Digital panel shows out coming water temp; Electric pulse ignition powered by 2 D-cell batteries (not included); Activates by water flow when faucet is turned on; Rust-proof… no water loss due to leaks; Anti-combustion and gas pressure safety protection; Works easily with low levels of water pressure; Applicable water pressure: 3.6 – 145.0 PSI; Hot water output per minute: 3.1 gallons per minute; Energy efficiency: 54% – 87%; Exhaust discharge mode: Flue duct type; Hot water output per minute: 3.1-gal.; Heat loss per hour: 79,228 BTU; Min. Pressure Water Activation: 10 psi; Maximum flow rate: 3.1 GPM; Max. distance to point of use: 50 ft.; Gas Types: Liquid Propane Gas, Natural Gas; Dimensions: Approx. 24″ x 14″ x 7″; Weight: Approx. 21 lbs.; Mfg. Number: GA10LPDP (LPG), GA10NGDP (NG); Marey Gas 10L Digital Panel Tankless Water Heater

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

Saves energy, saves water! Marey Power Gas 10L Tankless Water Heater requires NO electricity to deliver endless hot water! It’s simple to install and requires no electricity to operate. Energy-saving design heats up in seconds and uses gas only while water is flowing. Available in LP and natural gas models. Adjustable gas and water controls; Electric pulse ignition powered by 2 D-cell batteries (not included); Activates by water flow when faucet is turned on; Rust-proof… no water loss due to leaks; Anti-combustion and gas pressure safety protection; Works easily with low levels of water pressure; Applicable water pressure: 3.6 – 145.0 psi; Hot water output per minute: 3.1 gallons; Energy efficiency: 54% – 87%; Exhaust discharge mode: Flue duct type; Gas Types: Liquid Propane Gas, Natural Gas; Dimensions: Approx. 24″ x 14″ x 7″; Weight: Approx. 21 lbs.; Mfg. Number: GA10LP (Liquid Propane Gas), GA10NG (Natural Gas); Marey Gas 10L Tankless Water Heater

Product Description

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

From the Manufacturer

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

The incredibly efficient Eccotemp FVI-12 Natural Gas Tankless Water Heater uses an intense gas-fired flame to instantly heat water the moment it passes through the unit, so as long as you feed water in, hot water will come out! Comes ready to install. With the included horizontal vent kit, this Eccotemp FVI-12 Natural Gas Tankless Water Heater can be installed for indoor use right out of the box. Great for cabins and smaller homes, so you don’t bust your budget for a hot shower! The Eccotemp FVI-12 Natural Gas Tankless Water Heater is a manual water heater. This means that any water temperature adjustments must be made at the face of the unit using the knobs for water flow and gas pressure. Mixing cold water at your output source is not recommended. Have questions? Contact support at 1-866-356-1992 or [email protected]

Product Description

All Rheem heating, cooling and water heater heating products meet and exceed rigorous industry standards for quality and reliability. From raw material delivery to finished product assembly, each phase in the manufacturing process is effectively overseen to ensure the highest quality in water heater manufacturing. Rheem products are frequently tested and certified by various government and third-party testing labs to ensure quality standards.

From the Manufacturer

All Rheem heating, cooling and water heater heating products meet and exceed rigorous industry standards for quality and reliability. From raw material delivery to finished product assembly, each phase in the manufacturing process is effectively overseen to ensure the highest quality in water heater manufacturing. Rheem products are frequently tested and certified by various government and third-party testing labs to ensure quality standards.

Rheem RTG is a series of mid-efficiency condensing tank less gas water heaters designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of . 26GPM and minimum activation flow rate of . 40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and Eco Net enabled mobile app feature (additional kit available), buying the Rheem RTG tank less water heater makes perfect sense. Included are a digital remote control and 10ft. of thermostat wire. As this unit is for use outdoors no venting is required. Best if used with up to 3 bathrooms; . 82UEF (. 82EF Canada) efficiency.

Product Description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4” NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Conclusion

By our suggestions above, we hope that you can found tanklesss natural gas hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!