infratechplus Nowadays, there are so many products of stampede vxl 4×4 cooling in the market and you are wondering to choose a best one. You have searched for stampede vxl 4×4 cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings stampede vxl 4×4 cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Powerhobby Cooling Fan for Traxxas Velineon ESC VXL-3 / VXL3 Green FITS : 4-Tec 2.0 Bandit Rally Rustler VXL Slash 2wd / 4×4 Stampede 4×4 VXL
Powerhobby Cooling Fan FOR Traxxas Velineon VXL-3 ESC Green
Featuers :
Heat is the enemy, especially when it comes to Electronics. Powerhobby Cooling fan for the Traxxas Velineon VXL-3 ESC reduces ESC temperatures during extended operation for maximum power flow. Simple installation, Plug right in with the VXL-3S ESC
Fits But not limited to :
4-Tec 2.0 VXL AWD Chassis
Bandit VXL
Ford Fiesta® ST Rally
Rally VXL
Rustler VXL
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4
Slash VXL
Stampede 4×4 VXL
Stampede VXL
Includes : 1 Cooling Fan
Integy RC Model Hop-ups T8564CARBON XHD Steel Rear Universal Drive Shaft (2) for Traxxas 1/10 Slash & Stampede 4X4
- Genuine Integy Parts Ship Fast Direct From Our US Warehouse
- Top-Quality Materials & Superb Craftsmanship
- Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
- Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
- Check The Manufacturer’s Support Website For Cross-Reference Part Search
OVERVIEW: Upgrade your stock driveshafts with our Heavy Duty driveshafts. These are made tough to be stronger than the stock units, and are available for multiple vehicle fitments. Item T8564CARBON Barcode: 91789015894
Hot Racing ESC303T06 Velineon Vxl-S3 Esc Aluminum Heat Sink High Velocity Fan
- Made by Hot Racing
- Hot Racing is a United States based company
- parts are sourced from Chinese producers
- All Hot Racing upgrade parts are direct replacements for stock components
- additional parts are not required
- Hot Racing part number ESC303T06
- UPC 083745602272
- This item works with: Traxxas Bandit Electric, Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Slash 4×4 all versions, Stampede 4×4 VXL, Stampede Electric, Stampede VXL, Stampede XL-5
This is the optional aluminum heat sink with cooling fan for the Traxxas Velineon vxl-3 electronic speed control from hot racing features: Screw secure clamp on aluminum heat sink. Added heat sink cooling area. Mount higher to allow better airflow high Velocity fan simple installation plug right in with the VXL-3s ESC. You will receive: one high Velocity fan one set of heat sink mount.
Integy RC Model Hop-ups T8564BLUE XHD Steel Rear Universal Drive Shaft (2) for Traxxas 1/10 Slash & Stampede 4X4
- Genuine Integy Parts Ship Fast Direct From Our US Warehouse
- Top-Quality Materials & Superb Craftsmanship
- Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
- Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
- Check The Manufacturer’s Support Website For Cross-Reference Part Search
OVERVIEW: Upgrade your stock driveshafts with our Heavy Duty driveshafts. These are made tough to be stronger than the stock units, and are available for multiple vehicle fitments. Item T8564BLUE Barcode: 91789009765
Powerhobby Cooling Fan for Traxxas Velineon ESC VXL-3 / VXL3 Red FITS : 4-Tec 2.0 Bandit Rally Rustler VXL Slash 2wd / 4×4 Stampede 4×4 VXL
Powerhobby Cooling Fan FOR Traxxas Velineon VXL-3 ESC Red
Featuers :
Heat is the enemy, especially when it comes to Electronics. Powerhobby Cooling fan for the Traxxas Velineon VXL-3 ESC reduces ESC temperatures during extended operation for maximum power flow. Simple installation, Plug right in with the VXL-3S ESC
Fits But not limited to :
4-Tec 2.0 VXL AWD Chassis
Bandit VXL
Ford Fiesta® ST Rally
Rally VXL
Rustler VXL
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4
Slash VXL
Stampede 4×4 VXL
Stampede VXL
Includes : 1 Cooling Fan
Hot Racing MH550TE06 Blue Multi Mount Fan Heat Sink 36mm Motors, Blue
Blue Colored heat sink with Cooling Fan Can be adjusted to fit Traxxas Slash, Stampede, Rustler, Bandit, Etc. FEATURES: Aluminum heat sink and cooling fan helps motor to run cooler YOU WILL RECEIVE: One motor heat sink with cooling fan with red 2-pin wire connector REQUIREMENTS: Installation on motor SPECIFICATIONS: length: 1.7 (43mm) width: 1.4 (37mm) height: 1.6 (40mm).
Integy RC Model Hop-ups T8074SILVER Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit
- Genuine Integy Parts Ship Fast Direct From Our US Warehouse
- Top-Quality Materials & Superb Craftsmanship
- Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
- Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
- Check The Manufacturer’s Support Website For Cross-Reference Part Search
OVERVIEW: Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle s motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors. IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5. 0V and no more than 6. 0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6. 0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5. 0V and no higher than 6. 0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans. Item T8074BLUE Barcode: 91789006233
Hot Racing MH550TE06 Clip-On Two-Piece Motor Heat Sink W/ Fan (Blue)
- Made by Hot Racing
- Hot Racing is a United States based company
- parts are sourced from Chinese producers
- All Hot Racing upgrade parts are direct replacements for stock components
- additional parts are not required
- Hot Racing part number MH550TE06
- UPC 083745662221
- This item works with: Traxxas E-Maxx, E-Revo 5603 5605 5608, Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Slash 4×4 all versions, Stampede 4×4 VXL, Stampede XL-5
Hot Racing universal clip on motor heat sink and fan for use on 540 and 550 size motors. Versatile two-piece heat sink clip provides 8 different width adjustments. FEATURES: – Keeps the motor running cooler- Aluminum construction- Clip on heat sink attaches to 540 and 550 size motors with a 36mm can diameter- Two-piece heat sink clip provides 8 different width adjustment options (20-40mm). M3 screws and nuts will be required for some configurations. – Blue anodized- Laser etched Hot Racing insigniaYOU WILL RECEIVE: – One (1) heat sink with cooling fanREQUIREMENTS: – Installation- Some units may require assembly (1.5mm and 2mm hex wrench required)- Electrical hook up with 7.2-8.4V MAX DC power source- Plug requires soldering or connection to a receiver port plugSPECIFICATIONS: – Overall height: 39mm (1.54 inch)- Fan size: 30x30x7.5mm- Fan mounting hole pattern: 24mm square- Input voltage: DC 7.2-8.4V MAXCOMMENTS: – Some chassis do not have sufficient room for the fan assembly. Study the photos, and use your best judgement to determine fitment. – Color variants include: MH550TE01 (Black), MH550TE02 (Red), MH550TE06 (Blue), MH550TE07 (Purple), MH550TE16 (Tamiya Blue)- Replacement 30x30x7.5mm cooling fan is Hot Racing MH3030Fdescription revised by: SN December 6, 2017
Conclusion
By our suggestions above, we hope that you can found stampede vxl 4×4 cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
