infratechplus 
Nowadays, there are so many products of resistance heating ribbon wire in the market and you are wondering to choose a best one. You have searched for resistance heating ribbon wire in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings resistance heating ribbon wire which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
TEMCo Flat Ribbon Kanthal A1 Wire 0.8mm x 0.1mm 100 Ft Resistance A-1
- 0.8 x 0.1 mm (0.0315 x 0.004 in), Approx round wire equivalent: 28 AWG, 5.76 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
Staple Staggered Fused 6ft – Flat (0.1×0.3) x2+28GAx3+38GA+28GAx2+38GA Resistance Wire, Nichrome 80 Prebuilt Wires Household Wiring Use Cotton
- Staple Staggered Fused,Nichrome 80 Heat Resistant Wire
- Flat (0.1×0.3)x2+28GAx3+38GA+28GAx2+38GA 2m/roll
- This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses
- This product is not intended to be used with prohibited or illegal products. The product shall be used by advanced users ONLY
- Spools of pre-twisted wire makes this a super easy to work with product
- We send the organic cotton as a gift
Nichrome 80 is an austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1200°C (2190°F). The alloy is characterized by high resistivity, good oxidation resistance and very good form stability. It has good ductility after use and excellent weldability. Nichrome 80 is used for electric heating elements in home appliances and industrial furnaces. Typical applications are flat irons, ironing machines, water heaters, plastic moulding dies, soldering irons, metal sheathed tubular elements and cartridge elements. Due to extremely good adhesion properties of the surface oxide, Nichrome 80 offers superior service life compared to competitive nickel-chromium alloys.
Don’t toss that old appliance with a heating element of yours, repair it instead! Fix that old heating element in your toaster, space heater, or whatever your electrical need may be that requires this specification of wire!
Wire Specifications:
Diameter: Line up 2 x 0.1×0.3 flat wire as the core, Middle wrapped with 3x 28 Gauge (0.321mm) Wire, then wrapped with a 38 Gauge (0.101mm) wire, and then wrapped with 2 x 28 Gauge (0.321mm) wire, Outside wraped by a 38GA (0.101) wire
Length: 2 meters | 6′ Feet
Shape:Flat
TEMCo Flat Ribbon Kanthal A1 Wire 0.9mm x 0.1mm 25 Ft Resistance A-1
- 0.9 x 0.1 mm (0.0354 x 0.004 in), Approx round wire equivalent: 27 AWG, 5.12 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
TEMCo Flat Ribbon Kanthal A1 Wire 0.6mm x 0.1mm 100 Ft Resistance A-1
- 0.6 x 0.1 mm (0.0236 x 0.004 in), Approx round wire equivalent: 30 AWG, 7.68 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
6 ft – AWG 26GAx3+32GA Alien Resistance Wire Kanthal A1+ SS316L Prebuilt Wire Coils for Household Wiring Use
- Kanthal A1 + Stainless Steel 316L Heat Resistant Wire
- 26GAx3+32GA x 2m/roll
- This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses
- This product is not intended to be used with prohibited or illegal products
- Spools of pre-twisted wire makes this a super easy to work with product
- The product shall be used by advanced users ONLY
Don’t toss that old appliance with a heating element of yours, repair it instead! Fix that old heating element in your toaster, space heater, or whatever your electrical need may be that requires this specification of wire!
Wire Specifications:
Diameter: Line up 3×26 Gauge (0.405mm) wire, wrapped with a 32 Gauge (0.202mm) Wire with ‘S’
Length: 2 meters | 6′ Feet
Shape: Flat
TEMCo Flat Ribbon Kanthal A1 Wire 0.5mm x 0.1mm 100 Ft Resistance A-1
- 0.5 x 0.1 mm (0.0197 x 0.004 in), Approx round wire equivalent: 31 AWG, 9.2 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
FogsLord Alien Wire Kathal A1 Heat Resistance Wire Spool Braided Electronic Coil 15 ft. AWG 0.3×0.8 Flat + 32GA
- Spools of pre-twisted wire makes this a super easy to work with product
- Alien wire makes it easy to work with in spool form
- No more using the drill to twist your own wire
- Kanthal A1 Heat Resistant Wire
- 0.3*0.8+32GA x 5m/roll
- These wires are perfect for RF Transmitters / Receivers, FM Radios, a resistor in DIY electronics or for craft wire projects,and other electronic projects
This is A-1 grade Heat Resistant wire, a great spool to have in your DIY home arsenal, in Alien form!
Don’t toss that old appliance with a heating element of yours, repair it instead! Fix that old heating element in your toaster, space heater, or whatever your electrical need may be that requires this specification of wire!
Wire Specifications:
Diameter: 0.3mm x 0.8mm twisted together as the core, wrapped with a 32 Gauge (0.202mm) Wire
Shape: Round
Length: 5 meters | 15′ Feet
Melting Temperature: 1400°C / 2550°F
Width / Thickness: 1.4mm
BNTECHGO 24 Gauge Silicone Ribbon Cable Flexible 4P Black 50 ft Flat Cable 24 AWG Strand Wire
- High Quality Ultra Flexible Soft 24 Gauge black 4 Pin Silicone Ribbon Copper Wire!Super Low Impedance,Highly Efficient!
- High strand count copper core!24 AWG 4 Pin silicone ribbon wire has 40*4 strands 0.08 mm tinned copper wire,the copper strands are tinned,protecting them from corrosion and making it easier to solder.
- They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C,Low temperature resistance,in extreme cold -60 degree C.Rated Voltage: 600 volts.Outside diameter 1.6*4 mm,tolerance +/- 0.1 mm.
- 24 gauge 4 Pin silicone ribbon wire spool: black 50 feet.
- BNTECHGO silicone wire are widely used for model planes,model cars,model ships,batteries,lamps,household appliances,electric heating appliances,meters,instruments,motor lead wire and digital fields.
High Quality Ultra Flexible Soft 24 Gauge black 4 Pin Silicone Ribbon Copper Wire!Super Low Impedance,Highly Efficient!
High strand count copper core!24 AWG 4 Pin silicone ribbon wire has 40*4 strands 0.08 mm tinned copper wire,the copper strands are tinned,protecting them from corrosion and making it easier to solder.
They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C,Low temperature resistance,in extreme cold -60 degree C.Rated Voltage: 600 volts.Outside diameter 1.6*4 mm,tolerance +/- 0.1 mm.
24 gauge 4 Pin silicone ribbon wire spool: Black, 50 feet.
BNTECHGO silicone wire are widely used for model planes,model cars,model ships,batteries,lamps,household appliances,electric heating appliances,meters,instruments,motor lead wire and digital fields.
TEMCo Flat Ribbon Kanthal A1 Wire 0.4mm x 0.1mm 100 Ft Resistance A-1
- 0.4 x 0.1 mm (0.0157 x 0.004 in), Approx round wire equivalent: 32 AWG, 11.4 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
TEMCo Flat Ribbon Kanthal A1 Wire 0.7mm x 0.1mm 100 Ft Resistance A-1
- 0.7 x 0.1 mm (0.0276 x 0.004 in), Approx round wire equivalent: 29 AWG, 6.58 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found resistance heating ribbon wire for you.Please don’t forget to share your experience by comment in this post. Thank you!
