infratechplus 
Nowadays, there are so many products of rasberry cooling fan in the market and you are wondering to choose a best one. You have searched for rasberry cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rasberry cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (4-Pack)
- Used for Raspberry Pi 4, 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 4x Cooling Fans, 4x Screw Sets, 12x Heatsinks for Raspberry Pi 3B+, 16x Heatsinks for Raspberry Pi 4 Model B
- NOTE: Raspberry Pi Not Included
Descriptions:
It used for Raspberry Pi 4 Model B,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
4x Cooling Fan
4x Screw Set
12x Heatsinks for Raspberry Pi 3 Model B+
16x Heatsinks for Raspberry Pi 4 Model B
Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)
Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.
Specifications:
– Fan Size: 30x30x7.5 mm (LxWxH)
– Wire Length: 2.6 inches (66mm)
– Connector: One-to-Two pin
– Color: Black
– Bearing Type: Hypro Bearing
– Operating Voltage: DC 3.3V – 5V
– Start up Voltage: DC 3V
– Current: 120 mA
– Speed: 5000RPM±15%
– Airflow: 1.79CFM
– Noise Level: 15.92dBA
– Life Time: 30,000 hours
Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.
Similar items with 4 stars and above
EleDuino Raspberry Pi 4 Mode B Aluminum Alloy Case with Cooling Fan (Black+Fan)
- ✦NEWEST DESIGN CASE FOR RASPBERRY PI 4 :Compatible With Raspberry Pi 4 Model B 1GB/2GB/4GB Version Only，Pi Board NOT Included
- ✦BETTER HEAT DISSIPATION PERFORMANCE:Made Of Aluminium Alloy Case，Solid、Durable And Better Heat Transferable,Build A Mute Fan，Keep You Pi At A Efficient Cooling Condition，Extend Service Life And Improve Performance
- ✦EASY ASSEMBLY AND ACCESS TO THE PORTS:The Entire Installation Process Takes Only Two Minutes,All The Connect Is Open Except Gsi, Camera And Gpio Connectors
- ✦100,000 RASPBERRY PI LOVERS’ CHOICE，Good Quality Control And Refined Appearance，Together With Maker Create Exciting Projects And Batch OEM Case Is Wellcome
- ✦100% CUSTOMER SATISFACTION GUARANTEED：60 Days Free Exchange And 24 Months Warranty Guarantee.
Follow The Development Step Of The Raspberry Pi，We Update The Raspberry Pi Case，This Mode Only Compatible With Raspberry Pi 4，Share The Same Quality And Style As PI 3 Case，Keeping Cost-Effective And Together With Lover Creat More Interesting Projects.
Package Included:
1xEleduino ALU Raspberry Pi 4 Case
1xCooling Fan
1x Screwdriver
4x Rubber Feet
1x Ueser Guide
GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (2-Pack)
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 2x Cooling Fan, 2x Screw Set, 6x Heatsinks for Raspberry Pi 3B+, 8x Heatsinks for Raspberry Pi 4 Model B
- NOTE: Raspberry Pi Not Included
Descriptions:
It used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
2x Cooling Fan
2x Screw Set
6x Heatsinks for Raspberry Pi 3B+
8x Heatsinks for Raspberry Pi 4 Model B
Aokin 4 PCS Raspberry Pi Fan 30x30x7mm Cooling Fan Brushless CPU Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 3 B+, Pi 3, Pi 2, Pi 1 B+
- ????Suitable for A Variety of Products: Pi fan, 30x30x7mm Raspberry Pi zero w heatsink, suitable for Raspberry Pi 4 Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. This fan gives a smooth and quick working performance, which will provide you a perfect working space.
- ????Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Quickly dissipate heat for your Raspberry Pi or other experimental tools to and extend the lifespan of your Pi or other development boards.
- ????Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- ????Installation Screws Included: Don’t need to purchase screws by yourself. Screws Included. Fast installation in seconds. Intimate service, easy to install!
- ????Sleeve fan suitable for Raspberry Pi 4 and 3 B+. One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC), Compatible with other robotic projects and development boards
Aokin 4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
Raspberry Pi Fan,4PCS Raspberry Pi Cooling Fan (30x30x7mm) DC Brushless Heatsink Cooler Fan,One-to-Two Interface 3.3V 5V for RPi Zero/Zero W/Pi 2/Pi 3/3B+
- No noise:Raspberry Pi Cooling Fan is quiet when working,will not make you feel uneasy during working, but also a quiet experiment environment for you.
- Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use.
- Easy operation:Supplied with Installation Screws, Don’t need to purchase screws by yourself.easy to install! Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m3 / h
- Number of revolutions: 13200RPM.
- Friendly Customer Service: We provides 60 days money back guarantee for any reasons.and 24 hours customer service.
Raspberry Pi Fan Raspberry Pi Cooling Fan 4Pcs Raspberry Pi DC Brushless Heatsink Cooler Fan
Description:
This Pi fan connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Size (L x W x H): 3 x 3 x 0.7 cm
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m3 / h
Number of revolutions: 13200RPM
Noise Level: 18dba±10%
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
Similar items with 4 stars and above
Dorhea 2 pcs Raspberry Pi Cooling Fan Kit Dual Fans with Thermal Conductive Adhesive Tape and Heat Sink for Raspberry Pi 4, Raspberry Pi 3 B+ B, Raspberry Pi 2 Model B, Raspberry Pi B+
- High Quality — 100% brand new and in good condition,with high quality ,great performance, solid construction.
- Dual cooling fan –This Upgrade fan can make sure outputing a lot of wind and quiet enough. Dual cooling fan have 2 fans with 2 pcs heatsink and adhesive tape on the base .
- Pre-applied thermal conductive adhesive tape backing for easy installation and optimum heat transfer.
- Compatibility — Compatible with Raspberry Pi 4, Pi 3 B+, Raspberry Pi 3 B, Raspberry Pi 2 Model B, Raspberry Pi B+.
- Can be applied for active cooling Raspberry Pi and other development boards.
This fan is suitable for Raspberry Pi 4, Raspberry Pi 3 B+ B, Raspberry Pi 2 Model B, Raspberry Pi B+ .
The Dual-Fan Heatsink kit with pre-applied heat conductive adhesive tape for easy installation and optimum heat transfer.
Specification：
Size: 50mm * 25mm * 13mm
Operating Voltage: DC 4.5V – 5.5V
Start up Voltage: DC 3.7V
Current: 0.2A
Power: 1.2W
Package include:
2 X Raspberry Pi Dual Cooling Fan
Similar items with 4 stars and above
GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 1x Cooling Fan, 1x Screw Set, 3x Heatsinks for raspberry pi 3B+/3B/2B/B+,4x Heatsinks for raspberry pi 4 Model B
- NOTE: Raspberry Pi Not Included
Descriptions:
It used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
1x Cooling Fan
1x Screw Set
3x Heatsinks for raspberry pi 3B+/3B/2B/B+
4x Heatsinks for raspberry pi 4 Model B
iUniker Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B (Black with Large Fan)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi 4 Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 4 Model B
iUniker Raspberry Pi 4 Cluster Case, Raspberry Pi 4 Case with Cooling Fan and Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, 3 B+, Pi 3 B, Pi 2 B, Pi B+ (4-Layers)
- Complete Stackable Clear Acrylic Case Kit for Up To Four Layers
- Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+
- Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi
- With Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
Package Include:
1x 4-Layer Raspberry Pi Case
4x Cooling Fan
4x Raspberry Pi Heatsink Kit
4x Screw Set
Conclusion
By our suggestions above, we hope that you can found rasberry cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
