infratechplus 
Nowadays, there are so many products of pex heating manifold and actuators in the market and you are wondering to choose a best one. You have searched for pex heating manifold and actuators in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pex heating manifold and actuators which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
5 Loop Radiant Heat Manifold, 5-zone PEX Tubing Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" 3/4" PEX adapters sold separately)
- Nickel plated brass
- Imported
- Its nickeled brass material are higher thermal conductivity, faster heating and insertion into plastic pipes than stainless steel ones.
- 5 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.6 GPM high flow meter.
- Compatible to both 1/2″ and 3/4″ pipes outlets. Adapters not included please search AB manifold adapters 1/2 and 3/4.
- Heavy duty stainless steel mounting bracket
- It includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks.
4-wire Thermal Actuator for Radiant Floor Heating Manifold
These actuators are only guaranteed to work with and warrantied for stainless steel or brass PEX radiant heating manifolds. Applications: Manifold actuator is essentially a zone valve, designed to replace a manual balancing valve on the manifold. In conjunction with a 24V zone valve control and any 24V thermostat(s), manifold actuators allow to separate the manifold into “zones” (rooms) and to control the temperature in the room with radiant floors through the thermostat. Installation: Installation is easy: Simply unscrew the plastic manual balancing from the manifold, screw on the O-ring which comes with the actuator and snap on the actuator. Wiring is done as per zone controller manufacturer’s manual
AB Radiant PEX 1/2" Manifold Connector/Adaptor/Tubing Nuts (Pack of 10)
The 1/2 Inch PEX Manifold Adaptor is an additional component that enhances features of your radiant/PEXManifold product. The 1/2 Inch PEX Manifold Adaptor is used for PEX Manifold such as 2 Loops, 3 Loops, 4 Loops, 5 Loops, 6 Loops, 7 Loops, 8 Loops and 10 Loops.
2 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING w/ 2WIRE ACTUATOR
2 LOOP/BRANCH 1/2″ PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING w/ 2WIRE ACTUATOR
10 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING
Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2″ PEX, temperature gauges, flow meters, 4 wire actuators.
CMI- 24V Thermal Actuator for Radiant Floor heating manifold – Easy Installation – Maintenance Free (4-Wire)
- THE PERFECT FIT- Valve-adapter-concept ensures a perfect match to almost any valve bottom or heating circuit distributor on the market
- MAINTENANCE-FREE- Highly functional providing a long service life
- LONG-LASTING- Designed in a compact and modern casing
- EASY INSTALLATION- Just snap on and your done no extra tools needed.
- 30-Day MONEYBACK GUARANTEE- Not satisfied? Just send it back for a full refund. No questions asked.
CMI developed The CMI 24V Thermal (Thermoelectric) Actuator especially for Radiant Heat Manifolds. Opens and closes valves on heating circuit distributors of concealed underfloor heating and cooling systems.Functionality:We�ve combined ease of use and proper functionality to meet any temperature control a user may need. The actuator mechanism uses a PTC resistor-heated elastic element and a compression spring. The wax element is heated by applying the operating voltage and moves the integrated piston. The force generated by the movement is transferred on the piston lifting opening and closing the valve.Key Attributes:Compact Size, small dimensions360 Degree installation positionLow power consumptionLeak ProtectionGet your 24V Thermal Actuator today! Don�t wait just select �Add to Cart� now!Need a Stainless Radiant Heat Manifold? We have you covered check it out here:B075M2CWP8
Similar items with 4 stars and above
3 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING
Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2″ PEX, temperature gauges, flow meters, 4 wire actuators.
2-wire Thermal Actuator for Radiant Floor Heating Manifold
These actuators are only guaranteed to work with and warrantied for stainless steel or brass PEX radiant heating manifolds. Applications: Manifold actuator is essentially a zone valve, designed to replace a manual balancing valve on the manifold. In conjunction with a 24V zone valve control and any 24V thermostat(s), manifold actuators allow to separate the manifold into “zones” (rooms) and to control the temperature in the room with radiant floors through the thermostat. Installation: Installation is easy: Simply unscrew the plastic manual balancing from the manifold, screw on the O-ring which comes with the actuator and snap on the actuator. Wiring is done as per zone controller manufacturer’s manual
2 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING
Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2″ PEX, temperature gauges, flow meters, 4 wire actuators.
11 LOOP/BRANCH 1/2" STAINLESS STEEL PEX MANIFOLD with BALL VALVEs and 4 WIRE ACTUATORS for RADIANT HEATING
Stainless Steel Manifold set for Radiant Heat includes supply manifold w/ balancing valve and flow meter, return manifold w/ valves (ready for actuators), swivel fill/drain valve on both supply and return side, adapters for 1/2″ PEX, temperature gauges, flow meters, 4 wire actuators.
Conclusion
By our suggestions above, we hope that you can found pex heating manifold and actuators for you.Please don’t forget to share your experience by comment in this post. Thank you!
