Which Is The Best Monsoon Water Cooling Kit

Monsoon’s new Hardline Pro Bender Kit features everything you need to bend like a Pro all in one convenient box. Includes Monsoon Mandrel Kit, Monsoon Cutting Kit, and Meausing Kit. Monsoon Mandrel Kit provides everything you need to fixture and bend acrylic hard lines. Cutting Kit provides everything you need for clean, precise, square end cuts in acrylic hard lines. Measuring Kit provides everything you need to take advantage of the built in Center Line capabilities of our fixture and bending mandrels.

Model: TKH-1258-NOHG

Now making custom bends with rigid tubing could not be easier. With the Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tools have mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

• Material: PETG
• Inside Diameter: 12 mm
• Outside Diameter: 16 mm (5/8”)
• Length: 100 cm *4
• Color: Transparent

XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.

The MONSOON reservoir system is one of the sharpest looking reservoirs for any build on the market today. All the components are made of top quality materials engineered to have an excellent fit and finish. The ‘Reactor Core’ style tube is made from a partially frosted acrylic designed to create a superb design for the reservoir itself, while allowing the quality of the coolant inside to display brilliantly through the clear areas.

The reservoir system contains a total of 6 standard sized G1/4 ports to handle one or multiple loops and even install one of our CCFL Cathode Lights (Sold separately) in one of the unused ports. Precision machined from aluminum, the included 12mm tall reservoir mounts (“Grasshopper”) allow you to mount your reservoir perpendicular, 60 degrees left, or 60 degrees right. It features a pair of color matched load spreader bars to help minimize point loading on your case panel. The end caps are molded from heavy duty nylon with a black satin finish and allow you to mount a D5 pump (Sold separately) on one end. The D5 housing cap, made from machined aluminum, gives your D5 pump an elegant and suitable housing. This reservoir is approx. 78mm wide.

***PLEASE NOTE***

Reservoir system does NOT INCLUDE the following:

tube compression fittings, CCFL Cathode light and inverter, D5 Pump.

Cutting Kit provides everything you need for clean, precise, square end cuts in acrylic hard lines. Includes a machined aluminum miter box for making clean, precise, perfectly square end cuts in acrylic hard lines—the first time, every time. Miter box is polished and anodized for maximum durability and long service life. Miter box is color coded by tube size—Red for 1/2 x 5/8 (16mm) and Blue for 3/8 x 1/2 (13mm) to make grabbing the right size easy for pro modders. Miter box is sized specifically for 1/2 x 5/8 (16mm) tube so the tube stays in place. Includes a 6” hand saw with an extra blade and a simple lever operated blade changing system. The saw blades have teeth specially designed for making smooth clean cuts in acrylic. Includes an inside/outside tube reamer to easily clean and deburr the end of your tube after cutting.

Model: TKH-CUT-1258

This kit allows you to convert your existing Monsoon Premium compression fittings for soft tube over to acrylic hard lines. The antimicrobial silver bases replace the tube barbs in your existing fittings–saving you about half the cost of buying new fittings! The kit includes antimicrobial silver bases, acrylic lock collars, and premium silicone seals to convert your 3/8” x 5/8” or 7/16” x 5/8” Free Center, Chain Gun, or Carbon premium compression fittings for soft tube over for use with Monsoon Hardline 5/8” OD (16mm) acrylic tube. For use with Monsoon rigid tubing only.

Model: PBH-1258-6P

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. These are CCFL light tubes that you can mount inside the MMRS reservoir via any suitable G1/4″ port. The plug is machined from brass and includes a machined brass cap that allows you to remove or replace a CCFL bulb without the need to drain your reservoir. The tube is polycarbonate for extra durability and has a molded polycarbonate end cap that is ultra sonically welded to the tube. The other end is O-ring sealed and bonded into the brass plug base. Sleeved in premium black sleeving they also feature industry standard two pin connectors in black.

Model: ST-CCFL-300-2P-WH

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. These are CCFL light tubes that you can mount inside the MMRS reservoir via any suitable G1/4″ port. The plug is machined from brass and includes a machined brass cap that allows you to remove or replace a CCFL bulb without the need to drain your reservoir. The tube is polycarbonate for extra durability and has a molded polycarbonate end cap that is ultra sonically welded to the tube. The other end is O-ring sealed and bonded into the brass plug base. Sleeved in premium black sleeving they also feature industry standard two pin connectors in black.

Model: ST-CCFL-200-2P-WH

Conclusion

By our suggestions above, we hope that you can found monsoon water cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!