The 10 Best Liquid Cooling Connectors

Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

Description:
This all-in-one liquid CPU cooler kit provides 240mm heat sink, GPU block, CPU block, 6 red rigid tubes, water pump, cylindrical water reservoir, dual LED fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Note: The CPU block and the GPU block are universal type, suitable for INTEL / AMD Dual Platform.  

Specifications:
Package weight: 2613g

Package List:
1 x 240mm Heat Sink with Screw Pack
2 x LED Fan
1 x CPU Block with 4 Screws
1 x GPU Block with 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
6 x Red Rigid Tube
1 x Water Pump with Shock Pad
8 x Two-Touch Fitting
1 x Water Feeder
1 x Water Plug
1 x Nipple Connector
1 x Vent Plug

Specifications:
Monitoring Range: -50 ~110 degrees
Voltage: 5V – 24V
Interface: Big 4P
Screw Thread: G1/4
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Applicable Pipe: 9mm Outer Diameter
Thermometer Panel Size: Approx. 47.8 * 28.2mm
Package Size: Approx. 12 * 9 * 3cm
Weight: 98g
 
Package List:
1 * Water Flow Meter
1 * Thermometer
2 * Connectors
2 * Clamps
 
Note:
●Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
●Product’s size made for manual measurement,  1-2CM error belongs to the normal range.

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

Thermaltake Water 3.0 Riing RGB 360 Edition PWM AIO Tt LCS Certified Liquid Cooling System 3 Year Warranty CL-W108-PL12SW-A

Take your CPU to new heights with the Thermaltake Water 3.0 Riing RGB 360 Edition AIO Enthusiast Liquid Cooling System. From stock to overclock, the Water 3.0 Riing RGB Series fits the needs for CPU cooling performance with minimal maintenance for an all-in-one solution. With a high performance copper base plate, Patented Riing RGB LED Fans, universal socket compatibility and 360mm large surface radiator, gain up to 3X in cooling performance over stock CPU coolers. Experience extreme cooling performance and low noise to protect your most vital component from heat with the Water 3.0 Riing RGB Edition from Thermaltake.

Key Features:

• Patented PWM Riing 12 RGB LED Fans
• 360mm Aluminum Radiator
• Sleeved Tube with Copper Cold Plate
• Maintenance Free Operation
• 3 Year Warranty

Compatibility:
Intel LGA 2011-3/2011/1366/1156/1155/1151/1150
AMD FM2/FM1/AM3+/AM3/AM2+/AM2

Water Block:
Material Copper

Pump:
Rated Voltage: 12 V
Rated Current: 175 mA

Fan:
Dimension:120 x 120 x 25 mm
Speed:800 ~ 1500 R.P.M
400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level:18.5 ~ 26.4 dB-A
Rated Voltage:12 V
Max. Air Flow:22.14 ~ 40.6 CFM
Max. Pressure:0.57 ~ 2.01 mm-H2O
Connector:4 pin

Radiator:
Dimension:326 x 120 x 27 mm

Tube:
Length:326 mm
Material:Rubber
Weight 1320g

EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.

The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and maximum flow of 250L/h and a very compact form

The EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.

The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of a quality acrylic material.

Model: 3831109813744

Description:  
The water cooling fittings provides a perfect solution for enthusiast and custom PC builders to meet the needs of DIY and then setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in chrome coatings, take every detail seriously.

Features:
With silicone seal, provides an even seal around the tubing.Prevent coolant from leaking.
Chrome plated brass fitting, more durable.
For PETG Tubes: Outer Diameter 5/8″ (16mm)
Excellent  Heat dissipation
High quality and stability.

Specifications:
Product Name:  dual pipe quick 90 ° elbow
Thread size: G1/4   The actual outer diameter size is 12.9MM
Material: brass
Surface treatment: chrome-plated
Seal: with silicone seal
Size: Support diameter 14MM pipe
Color: black, silver(Optional)

Package List:
1* 90 Degree Tube Connector

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-speed USB 3. 1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Sixpack: Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 – Chrome sixpack

Conclusion

By our suggestions above, we hope that you can found liquid cooling connectors for you.Please don’t forget to share your experience by comment in this post. Thank you!