The 9 Best Ladder Line For Ham Radio

MFJ-1778 – G5RV Wire Antenna – Multi-Band center-fed dipole antennas. These are multi-band, center-fed dipole antenna capable of 1,500 watts. Designed as 3/2 wavelength antennas for 14 MHz, they provide reasonable performance on many other bands. They cover all bands from 80-10 meters with a wide range antenna tuner. They are 102 ft. long and are designed to be used as an inverted vee or sloper to be more compact. Specifications: Assembled Wire Antenna: Yes Wire Antenna Type: Multi-band, non-resonant Antenna Power Rating: 1,500 Watts Wire Antenna Length: 102.00 ft. Antenna Tuner Required: Yes Feedline Connection Type: UHF female, SO-239 Minimum Recommended Feedpoint Height: 35.00 ft. Wire Gauge: 14-gauge Center Insulator Maximum Rope Size: 0.375 in. Wire Antenna Weight: 2.90 lbs.

W2AU 4:1 Ladder-Line Transition Balun  Long the standard of the industry the W2AU baluns are built to last! 2 KW PEP (at SWRs of less than 3:1). W2AU Baluns are transformer designs with ferrite cores to provide 95% minimum coupling efficiency. Each has a built-in lightning arrestor, and 600 lbs of pull-apart strength in a weatherized, rugged package using only stainless steel hardware and quality materials. USAGE NOTE: Since many Hams are the inventive types, it should noted that they also tend to not read the instructions and succeed in achieving their goals. In any event, the matchbox is a tuner and all it does is make the transmitter believe it has an antenna with a lower SWR than it really has. This way it will introduce more power to the antenna than it can typically radiate. A random length antenna, one not tuned to any one frequency is a compromise antenna. Anywhere it is not resonant it will produce significant SWR above 3:1. With 200 watts of continuous key down CW it would heat up the core of the W2AU balun, at the feed point,and damage it, but that is the extreme example. Many Hams understand this and do it anyway with care. Also, note that new solid state equipment further limits your operating options never contemplated over 50 years ago when these instructions were made. The equipment manufacturer dictates the parameters of your operating ability. It is suggested that if using ladderline, no balun, because a balun at the feedpoint, would interfere with the radiation that the offset antenna needs from the ladderline. Instead use a W2AU 4:1 Ladder Line Balun at the end of the ladder line transitioning the ladder line to a coax entry into your shack. A 4:1 extends resonances available. Some hams use a 1:1. These are some ideas in using an offset antenna.

MFJ 50′ 450OHM, 18GA SOLID LADDER LINE

The MFJ-18H050 is a 50 foot piece of 450 Ohm twin lead ladder line. Two 18 gauge solid (non-stranded) copper-clad steel. Its insulated and spaced by heavy duty black polyethylene. Uniform spacing between conductors insures proper balance — its ideal for balance line and dipole projects.

The ZS6BKW antenna is an optimized variant of the venerable old G5RV. Unlike the original G5RV, which requires an antenna tuner on all bands, the ZS6BKW / G5RV is capable of operating on 10, 12, 17, 20 & 40m bands, generally without a tuner, and with SWR readings usually at 1.5:1 or less. Using a tuner, 6, 15, 30 & 80m bands are attained with much higher efficiency than the original G5RV. Each Antenna is handmade to order with materials carefully tested & selected by Ni4L for quality & durability: Poly-Stealth 13 – machine crimped for permanent connection (92′), FLEXI 420-OHM LADDER LINE #16 AWG (40′), W2AU LL-TRANSULATOR, LADDER-LOC Center insulator, SS hardware & two small end insulators. Hanging the Z6SBKW/G5RV: The ZS6BKW/ G5RV is completely assembled and ready to hang. It requires about 92’ of space and should be hung around 40’ high or higher. It can be hung in a flat top or inverted V configuration. Unlike Windom and OCF Dipoles, the ZS6BKW / G5RV is a very forgiving antenna when it comes to nearby towers, trees, fences and other structures. IMPORTANT NOTE: As with all models of the G5RV antenna, the Optimized version also requires a minimum of 70 feet of 50-52 ohm coax to complete the matching network. Without this 70 foot of coax, the antenna will NOT function correctly.

The RadioWavz G5RV Jr. antenna measures only 51 feet across the top for 40 thru 6 meter operation, and is fed at the center through a low loss 450 ohm ladder line. The interaction between the radiating section and the feed-stub makes the G5RV Jr. usually easy to match on all-bands from 40 meters through 6 meters with good antenna tuner. (An antenna tuner is required to make this antenna work on multiple bands)This antenna is made of high quality UV insulated 14awg. stranded wire on the top and a heavy duty 300 ohm twin lead. This 300 Ohm twin lead is made with heavy duty PVC made to last in the most inclement of environments. The twin lead terminates into a SO 239 connector.Band width: 40 meters to 6 meters (With a tuner)Antenna Width: 51 feet end to end 14awg. UV insulated stranded wire.Antenna hight: 14 feet 450 ohm ladder linePower: 1500w

Hy-Gain AV-18VS – 10/12/15/17/20/30/40/80 Meters HF Vertical Antenna. The Hy-Gain Model 18V-S is a trapless, vertical antenna which is manually tuned to any band, 10 thru 80 meters, by a simple adjustment of the feed point on the base inductor. It is designed to be fed with 50 ohm coax, and works efficiently for DX or local contacts. It now features stainless steel hardware for all electrical and most mechanical connections. This antenna is self-supporting and can survive winds in excess of 80 mph. It is highly portable and knocks down to an overall length of 5 feet. Specifications: Coverage: 10, 12, 15,17, 20, 30, 40, 80m Max Power: 1500 Watts PEP Input Connector: Lug Height: 18 feet Weight: 4 pounds Wind Survival: 80 MPH Mast Size: 1.5 in – 1.625 in. OD

102 ft. all band doublet covers 160-6 Meters with balanced line tuner. Super strong custom fiberglass center insulator provides stress relief for ladder line (100 ft. included).

Multi-band center-fed dipole antenna capable of 1500 Watts. It consists of 52 feet flat-top fed with 17 feet of 450 Ohm matching section ending in an SO-239 coax connector.

This is the Super Antenna MP1 SuperStick antenna. The popular portable ham radio antenna for transmitting and receiving on HF and VHF bands. Rated #1 in the HFpack Portable Antenna Shootouts. Great for keeping a low profile, taking an antenna with you, or in place of a permanent outdoor amateur radio antenna. NEW with this version: Self-Locking SuperSlider. Manually slide its SuperSlider coil to your desired frequency and start transmitting with a good SWR. This upgraded MP1C antenna packs down to fit in your Go Bag, then instantly expands up to full size when you need it for Emcomm deployments, DXpeditions, or temporary base installations. Great for manpack, /PM Pedestrian Mobile work, Survivalist and Prepper Communications in a Bug Out Bag, Emergency Communications. Super Antenna offers a whole range of mounts, accessories, and options to go with the MP1C SuperStick Portable Antenna. Recommended Mounts: SuperAntenna UM2, TM1, TM3, TM4. Recommended Super Antenna radial sets: MR4010, MR642, MR1710, MR4020, MR8060, MR8075, MR6060. Comes with the Super Antenna FG1 Frequency Guide SWR Ruler. [Contents of this package: a Super Antenna Model MP1C Portable Antenna, consisting of 1 SuperSlider, 1 Telescopic Whip, 2 extension rods, 1 coupling nut, 2 instruction sheets, 1 FG1 Frequency Guide SWR Ruler] [Antenna materials: Aluminum, Brass, Beryllium, Copper, Polymers] Genuine Super Antenna designed in Silicon Valley, USA. COLOR: Black and Metallic. WEIGHT: 1 pound (0.5kg). FITTINGS: This antenna has a 3/8″-24 male fitting at the bottom. RECOMMENDED ACCESSORY MOUNTS: UM2 SuperMount Universal Clamp Mount, TM1 Low Profile Portable Tripod, TM2 SuperPod Large Portable Tripod. Also attaches to most standard ham and CB mounts. Requires a standard 3/8″-24 mount for operation. THIS IS ONLY AN ANTENNA. THIS ANTENNA REQUIRES A MOUNT AND COAXIAL CABLE FOR OPERATION (sold separately). ACCESORIES: See promotions for discount accessory options sold by Super Antenna below.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy ladder line for ham radio, eg:

• What are Top 10 ladder line for ham radio for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 ladder line for ham radio to buy?
• What are Top Rated ladder line for ham radio to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ladder line for ham radio?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ladder line for ham radio.
• Before deciding to buy any ladder line for ham radio, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose ladder line for ham radio and What you should consider when buying the ladder line for ham radio and Where to Buy or Purchase the ladder line for ham radio. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 ladder line for ham radio of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ladder line for ham radio.

Conclusion

By our suggestions above, we hope that you can found ladder line for ham radio for you.Please don’t forget to share your experience by comment in this post. Thank you!