infratechplus 
Nowadays, there are so many products of johnson water filter in the market and you are wondering to choose a best one. You have searched for johnson water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings johnson water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Moeller 033320-10 10 Micron Water Separating Filter Kit
- 10 Micron Water Separating Filter Kit
- Designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications
- Includes a powder coated reusable filter head, filter, barbs and plugs
- Not recommended for use with electric fuel pumps
The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.
Boat Motor Fuel Filter Marine Fuel Water Separator Mercury/Yamaha Johnson OMC Outboard 35-60494-1 S3123 10 Micron 11/16" Engine
- 100% Made in Taiwan Quality
- For Mercury Outboard Part Number: 35-60494-1 (check OEM part number before purchase!!)
- 10 micron filter element, efficiently removes small particles and separates water from your fuel
- 60 GPH (240 litres per hour) will not separate oil from fuel and is therefore suitable for pre mix 2-stroke fuel as well as 4-stroke fuel. (Not suitable for diesel fuel)
- Boat Motor for Outboard Engine
To Drain Water: 1. Loosen self-venting drain plug to drain water from bowl into a container., 2. Tighten drain., 3. Use primer bulb to fill filter with fuel., 4. Start engine and check ensure there are no leaks. Thread Type / Size: Mercury Thread 11/16″ 16 T.P.I
CARMOCAR Water Separating Fuel Filter System for outboard Motors (3/8" NPT, Composite)
Features: -Composite fuel filter clear bowl kit. -Water separating canisters. -High performance 3/8 NPT ports offer lower pressure drop rates. -Designed to trap the smallest particles and emulsified water from gasoline. Product Type: -Tools. Use: -Filter. Generic Dimensions: -10.25″ H x 14″ W x 19″ D, 24 lbs. Dimensions: Overall Height – Top to Bottom: -10.25 Inches. Overall Width – Side to Side: -14 Inches. Overall Depth – Front to Back: -19 Inches. Overall Product Weight: -24 Pounds.
Moeller Clear Site Water Separating Fuel Filter System for outboard Motors (3/8" NPT, Composite)
When you’re out on the water having fun, you shouldn’t need to give your fuel system a second thought. With Moeller, you don’t. Our products are safe, reliable, and durable. For more than 25 years, Moeller Marine has been the industry standard in fuel system design and construction. Moeller’s reputation is built on innovative engineering, quality construction, and award-winning service.
Sierra 18-7982-1 Fuel Water Separator Kit
- Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
- Prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
Boat Motor CLEAR BOWL & DRAIN ONLY – Suits Fuel Filter Water Separator Mercury Mercruiser Quicksilver Johnson OMC Boat/Marine/Outboard
- 100% Made in Taiwan Quality
- Fuel filter bowl with screw drain plug only, suits many Outboard filter element (Racor #S3213 type)
- Clear easy-viewing drainage bowl & screw drain plug designed to quickly and easily remove any trapped water in the filter
- Ethanol approved – Safe for use with ethanol fuel
- Boat Motor for Outboard Engine
Johnson Pump Fresh Water Filters Strainer Cover
Cover, Strainer, MFG# JP-01-36012 PO2, for filters used with fresh water pumps. Strainer Cover For filters used with fresh water pumps. Johnson Pump Part No. 01-36012 PO2.
Johnson/Evinrude 0502905 Fuel Water Separator Filter 0502905
Genuine Johnson/Evinrude/OMC New OEM PAIR Water Separating Fuel Filter Cannister 502905. This is a factory original equipment accessory, not aftermarket. Manufacturer Part # 0502905×2.
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Water Pump Repair Kit, Outboard Water Pump Impeller Repair Kit for Johnson Evinrude 40 48 50 HP outboard motors
- Premium quality: This water pump repair kit is made of high quality metal and plastic,it is durable for long lasting
- Set included: Comes with needed tools and it include impeller, wear plate, insert cup, water pump gasket, installing bolts, etc. And it also consists of a housing
- Function: The kit can immediately help repair those broken pumps and this product helps to make the water pump work again. This impeller kit is developed for top performance. And it’s very convenient for you to use, you could to try it as your good helper
- Application: Fit for Johnson Evinrude 40 48 50 HP outboard motors
- Notice: It’s also for a long lasting use in salt water
Description:
This is a set of water pump repair kit for Johnson Evinrude 40 48 50 HP outboard motors. It consists of the basic rebuild tools, such as impeller, impeller key, water pump gasket, installing bolts and washer, etc, which is very convenient for outboard motors maintenance and repair.
Features:
✔ This is a water pump rebuild or repair kit for Johnson Evinrude 40 48 50 HP outboard motors
✔ This water pump kit replaces OE# is 438592
✔ Comes with needed tools including impeller, wear plate, insert cup, water pump gasket, installing bolts, etc. And it also consists of a housing
✔ Made of high quality metal and plastic, it is durable in use
✔ This impeller kit is developed for top performance. Come and have a try
Specifications:
Material: Metal, Plastic
Color: As Picture Shown
Housing Size: 11 x 8.8cm/4.3” x 3.5”
Wear Plate Size: 11.3 x 9cm/4.4” x 3.5”
Insert Cup Size: 8 x 3cm/3.15” x 1.18”
Bolt Length: 3cm/1.18”
Impeller Tooth-Tooth Distance: 8cm/3.15”
Big Adapter Diameter: 3.9cm/1.54”
Package Weight: approx. 500g
Conclusion
By our suggestions above, we hope that you can found johnson water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
