Best Ignitor Switch For Gas Oven

The lighter cap is made of plastic, and it is safe and non-toxic. It can be used in many different gas grill, easy to use. It can be used repeatedly and durable for long time use.

Feature:

made of high-quality plastic and it is safe and non-toxic, odorless and durable. It is perfect for 1/2/3/4/5/6 outlet of gas grill, and you can replace it with new lighter cap. It can be used in many different gas grill, easy to use. It is an essential accessory for barbecue grill, useful and practical. Reusable and durable: it can be used repeatedly and durable for long time use.

Specification:

Condition: 100% Brand New
Material: Plastic
Color: Black

Size: approx. 3*3cm/ 1.18*1.18in

Weight: approx. 13g/ 0.45oz

Package list:
1 * Lighter Cap

Notes:
1. Please allow 0-2cm error due to the manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Product Description

Replacement gas oven ignitor. This is a genuine replacement Frigidaire ignitor. This is a flat style 3.72″ ignitor with 18″ of wire and 1/16 of exposed white ceramic. Amperage ranges from 3.2-3.6. This kit includes mounting bracket and wire nuts.

From the Manufacturer

Frigidaire 5303935066 Igniter for Range with 18 inch leads. . This part works with the following models: Frigidaire 30-2272-23/07, Frigidaire 30-3053-00-04, Frigidaire 30-3053-23-03, Frigidaire 30-3053-23-04, Frigidaire 30-3658-66-03. Genuine Replacement Part.

OEM Factory Part. 5303935066

This is a genuine replacement part.

This is a Brand New Oven/Stove Replacement Ignitor

This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This ignitor replaces both the Norton 201 and 271 types used on Rheem, Ruud, and Weatherking furnaces. This part WILL NOT fit the -GEC and -GED “Drum” furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a “hot spot” and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

This ignitor is the "narrow" style used by Goodman Manufacturing on many furnace models built under the Amana, Goodman, and Janitrol brands. The ceramic block on this ignitor is 1-1/4" wide, 1-3/16" deep, and 1/2" thick on the edge without the ridge. There is a locating ridge on the top right corner of the ceramic block when viewed from the wire end. The heating element portion of the ignitor is 2-1/4" long. a 90 degree mounting bracket is included that mounts to the ceramic block. If the original bracket is a snap-in fit the ignitor can be snapped into the original bracket if desired. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a plastic housing. This connection style was used on many Goodman, Amana, and Janitrol furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Goodman Amana Janitrol part numbers B1401015S and B1401018. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

Feature: It’s an replacement parts to the barbecue grill. Suitable for almost all brands and models. This universal button electronic ignition replacement module is suitable for most grills. With its highly durable design, you can ensure that your barbecue lights up every time. Working mode: automatic ignition (connected with the micro switch on the valve, without pressing the igniter, as long as the valve is opened, it can ignite automatically)
Specification:
Condition: Brand New
Material: PP+Paper
Input power: DC 1.5V/1 * AA battery
Output voltage: above 12KV
Optional Output terminal: 1#2 outlet
Size: Approx 7.5*6*3cm/3*2.4*1.2in
Package Weight: Approx 95g

Package List:
1 * Pulse Igniter

Note:
1. Not including batteries!
1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

this cap is suitable for AA battery igniter for grill , heater, fireplace etc.

Specifications:

Item: AAA Igniter Button Cap
Material: Plastic
Color: Black
Dimension: 1.05″ / 1.05″

Note:

This item is for AAA battery igniter NOT AA battery igniter, please pay attention when ordering.

Package Included:

2 Pc x AAA Igniter Button Cap.

Conclusion

By our suggestions above, we hope that you can found ignitor switch for gas oven for you.Please don’t forget to share your experience by comment in this post. Thank you!