infratechplus 
Nowadays, there are so many products of easy heat gts1 thermostat with heating cable in the market and you are wondering to choose a best one. You have searched for easy heat gts1 thermostat with heating cable in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings easy heat gts1 thermostat with heating cable which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
EasyHeat 2102 Freeze Free Heating Cable – 100′
- Self-regulating pipe heating system
- Provides flexible protection against pipe freeze-ups in even the most challenging applications
- Reduces power consumption when the pipe does not require freeze protection
- Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
- Length: 100′ and rugged metal braided jacket provides an electrical ground as well as protection against damage
EasyHeat Freeze Free self-regulating pipe heating cables provide flexible protection against pipe freeze-ups in the most challenging applications. The cut-to-length technology is ideal for installations that require protection of numerous pipes of varied lengths. The self-regulating effect of the cable reduces power consumption when the pipe does not require freeze protection. They are ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures; water supply lines underneath manufactured homes; and cottages, barns and outbuildings that are not regularly used.
Easy Heat RS-2 Automatic Roof De-Icing Cable Control
Product Description
RS-2 features: -automatic roof de icing cable control. -Installs quickly & easily. -State of the art electronic sensor. -Turns the cable on for de icing only when required. -Easily installed. Product type: -heating cable. Generic specifications: -1200W capacity at 120 VAC. Dimensions: overall height – top to bottom: -8″. Overall width – side to side: -6.75″. Overall depth – front to back: -3.25″. Overall product weight: -1.6 lbs.
From the Manufacturer
Easy Heat RS-2 Roof De-Icer Control
HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
Similar items with 4 stars and above
HEATIT HISD 30-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
Similar items with 4 stars and above
50 Sqft Cable Set, Electric Radiant Floor Heat Heating System with Aube Digital Floor Sensing Thermostat
- 50 Square Foot Under Tile Heating “Cable Set” (spool of wire), 120 Volts
- Highest Quality Heating Cable, Twisted Pair for Zero EMF, Single Cold Lead, Very Thin, 1/8″ thk
- Wire is laid out 3″ apart acroos the area to heat. Allows easy heating of odd shapes
- Includes Honeywell/Aube Digital Floor Sensing Thermostat with Floor Sensor Wire(model TH115-AF-120S)
- Includes installation monitor and plastic cable guides to secure wire to floor. UL LISTED for USA and Canada.
HEATIT ET-21 Freeze Thermostatically Controlled Outlet On at 38F /Off at 50F
- Thermostat control outlet with the smart indicator light: The indicator light turns on when it’s below 38 and it has energized the outlet.
- Energize below 38℉(3℃) and to turn off automatically at approximately 50℉(10℃). Automatically turns power on and off according to ambient temperature. Save energy and save money
- Easy installation: just plug this device into electrical outlet. Maximum 15 amps. CSA approved. Only for dry location.
- Can be use for other applications: 120 VAC electric heaters, gas heater, Engine heaters, pipe heat tape, roof heating cable and so on
- Make a test when you received the product. Put it into the freezer for 45 minutes. And then plug in and you will see the red light on the thermostat control. Two year limited warranty- If you are not completely satisfied with HEATIT ET-21, please don’t hesitate to contact us in any time, we’ll try our best to solve your issues.
Conclusion
By our suggestions above, we hope that you can found easy heat gts1 thermostat with heating cable for you.Please don’t forget to share your experience by comment in this post. Thank you!
