Best Active Carbon Block Water Filter

Replacement Coconut Shell Carbon Block Cartridge for standard 10″ filter housings, i.e. 9.75″ x 2.5″. All Brio 10′ standard systems. Size:9-3/4″ H x 2-7/8″ W, 0.5 Micron This Brio carbon block filter cartridge further reduces fine sediment, (recommended post filter from sediment filter of 5 microns or less), chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) by at least 98% in up to 5,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of Coconut Shell activated carbon filter media wrapped in polyolefin with polyethylene outer netting. The food grade rubber gaskets seals the cartridge against the housing to prevent unwanted by-pass. The cartridge operates over a temperature range of 40 to 120 degrees F. This carbon block filter cartridge meets NSF/ANSI Sanitation Foundation/American National Standards Institute (NSF/ANSI) standards for purification of residential and commercial drinking water. Specifications Nominal filtration rating 0.5 micron Removal of protozoan cysts 99.95% Chlorine reduction capacity 5,000 gallons at 2 gpm Maximum dimensions (H x W) 9-3/4 x 2-7/8 inches (248 x 73 mm) Materials certification NSF/ANSI standard 42 Cartridge used for filtration systems typically consisting of a series of two or more types of filters, each designed to remove different contaminants. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, hydroponics, among others.

MV-ROGBSET includes 1 x sediment-Red (SKU: MVSED11), 1 x extruded carbon block composite-Orange (SKU: MVECBC11),1 x Filmtec material reverse osmosis membrane @ 50gpd-Green (SKU: MVRO50), and 1 x post granulated active carbon-Blue (SKU: MVPOGAC11). Fits all Metpure MV4 systems. Recommend replacing every 6 to 12 months depending on usage for sediment and extruded carbon block composite filters and replacing every 2-5 years depending on usage for reverse osmosis membrane and post granulated active carbon. Sediment: 5 micron, 100% melt blown polypropylene, used to remove large sediment such as sand and rust. Carbon block composite: 5 micron extruded carbon block designed to remove chlorine, odor, organic chemicals, and secondary polypropylene sediment removes and prevents residual carbon fines from entering reverse osmosis membrane. Reverse osmosis membrane: the heart and workhorse of the water filtration system powered by Dow Filmtec membrane material, with its pore rating at 0.0001 micron, that rejects up to 99% of impurities, essentially allows only pure water to be filtered through. Post granulated active carbon: Consists of granulated coconut shell carbon which acts as a taste and odor reduction that polishes and refines the water to become refreshing, crisp, and invigorating, . To ensure the quality of water being produced by the Metpure Versatile system, following the filter maintenance schedule is highly recommended. Metpure Versatile quick twist filters are designed to be installed without tools. Use with matching CAM (SKU: MVFCAM14) for non-RO membrane filter and use CAM (MVROCAM14) for RO membrane filter. Temperature: Min 39 F°-Max 100 F°. Performance pressure: Min 15 psi – Max 80 psi.

6 OF 5 MICRON 10 INCH GRANULAR ACTIVATED CARBON GAC WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON

Granular activated carbon is made of a highly porous adsorbent material, produced by heating organic matter, such as coal, wood and coconut shell, in the absence of air, which is then crushed into granules. Activated carbon is positively charged and therefore able to remove negative ions from the water such as ozone, chlorine, fluorides and dissolved organic solutes by absorption onto activated carbon.

Features:
Dimensions: 9.75” by 2.5”5 Micron FiltrationPremium Quality Coconut Shell Granular Activated Carbon cartridge is often used for Reverse Osmosis pre-filtration and many other filtration applications.This cartridge fits in Standard 10″” HousingsTo keep your filter system operating efficiently, replace this cartridge as needed and on a regular basis. This can be 6-12 months for many residential applications.Before putting a new cartridge in service, pass 2-3 gallons of water through to waste to flush out carbon fines.Water flows from bottom to top with rubber gasket on top.Service Life: 5000 gallons @ 1 PPM Chlorine

COMPATIBLE FILTERS AND HOUSINGS
Ametek C-10, Dupont WFPFC9001, AquaPure AP117, Pentek GAC-10, GE FXUTC, Culligan D-20A, Omni GAC1, Dupont GAC-1, Cuno CFS117, Whirlpool WHKF-GAC, Everpure CGT-10, Ace Hardware 49640, Sears 34375, Hydronix HDG-P117, American Plumber WCC, HydroCure PC 36599, Dupont GAC1-SS, Tier2 GAC-10, 3M CFS117 / AP117, Dupont GAC1S, Dupont GAC1SS, Dupont GAC1D, Dupont GAC1-S, Dupont GAC1-D, TrueValue 826-746, Flotec TO2, etc. Fits most standard 10 inch Undersink Reverse Osmosis or Water Filtration systems like Ametek CTR-210, Culligan RO-3000, RO-3500, RVF-10, SY-2000, SY-2650, US-600, Pentek US-1000, US-1500

Samsung DA29-00020B Compatible Water Filter

Conclusion

By our suggestions above, we hope that you can found active carbon block water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!