infratechplus 
Nowadays, there are so many products of heating and cooling coils in the market and you are wondering to choose a best one. You have searched for heating and cooling coils in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating and cooling coils which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
DC 12V-24V 1000W 50 A ZVS Low Voltage High Frequency Induction Heating Module Board with Tesla Coil and Cooling Fan
- Input voltage DC 12V ~ 40V, maximum input current 50A (short), recommended Input voltage range DC 24V ~ 36V
- The power supply used for heating must be large enough
- Using a protective power supply, don’t use battery or battery power
- For long time use, brass tube with water must be used for cooling
- This one is mainly used for heating
Note: It is the working voltage work, the input voltage when the coil is connected or heated. Not the no load voltage. When 12V for power supply, the current should be no less than 20A; when 24V for power supply, the current should be no less than 30A; when 36V for power supply, the current should be no less than 50A. For long time use, brass tube with water must be used for cooling.Output port copper cylinder can most install copper tube of 10mm diameter; when the copper diameter is no more than 4mm, you can solder the copper tube on the clip then fix the copper cylinder; when the diameter is no more than 2mm, it can be connected with output terminal.
This one is mainly used for heating, suitable for the heating power is less than 300W.
Specifications:
Input Voltage: DC 12-40V
Max Input Current: 50A (short time)
PCB Size: 16.5 x 11.2cm/6.5 x 4.4 inch
Board thickness: 0.16cm/0.063inch(only board)
Weight: 780g
Package Included:
1 x induction heating module
1 x brass tube
1 set x brass cylinder and screw
Yosoo 1000W ZVS Low Voltage Induction Heating Board Module Tesla coil 12V-48V Flyback Driver Heater DIY
- This section of induction heating using low-voltage DC power supply 12-48V Maximum current 20A, maximum power 1000W.
- Tested 53V power supply when working properly.
- Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment, Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
- 24V input with no load current of 3A , 48V input with no load current of 6A
- The higher the voltage, the greater the heating current when the same thing, the effect is better, But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
Note:
1. The kit contains a full set of driving circuit elements and brass
2. Buyers need to bring their own power and cooling unit.
3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
4. The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
5. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.
Note:
Make sure to thoroughly cool this while running anywhere near the specified limits (a very high CFM computer fan will help).
You must turn your power supply on first then put the power to the heater or you will burn it up.
Package includes:
1 x ZVS Low Voltage Induction Heating Board 1 x Brass
Bio-Shield UV-C Air Sanitizer System, Cleans Air of Bacteria, Germs, Mold and Allergens
- Cleans and sanitizes air by killing bacteria, viruses, Allergan, mold. Uses less electricity than a 25W light bulb. Easy DIY installation
- Kills contaminants that causes colds, flus, allergies, sinus infection
- Reduces A/C costs by removing bio-film on A/C coils making them more efficient
- Uses Germicidal UV-C lamps made by Phillips, coated with Teflon for protection during accidental breakage
- Eliminates the need for costly duct work cleaning
1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan
- The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast
- it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.
- please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out
- please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included).
Specification:
Product size:Approx.180x90x80mm (please allowed 1-3mm error)
Heater ring inner:70mm (Recommended crucible+quartz suit,maximum support of 58mm crucible)
Power supply:
New style :AC 100-220V Adapter
Old style: Main board Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12V≥10A , 15V above≥15A
NOTE:New style and Old style shipped by randomly!!!
It doesn’t affect the performance of product.!!!
Maximum power: 1800W
Maximum current: 40A
Package Content:
1 x PCB board
1 x 48V copper tube
1.The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. you can buy a small water pump and 2 meters of rubber hose(inner diameter is 4mm) for build a water cooling system
Please pay attention to using switch power supply, because output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit that will be lead to circuit can’t afford to vibrate caused by lacking voltage,so that the two MOS tube conduction and components will burned
comes with heating circle diameter-60 mm/design voltage-36V,if you use more than 40V Devices shall be used ≥70 mm diameter heating ring, DC 12V water pump use, please use separate power supply voltage regulator module to avoid fan and water pump are burn out
The minimum input is 12V, but it doesn’t mean all 12V power supply available,The module has specific requirements on voltage and current , 12V require current must than 10A ,output power will greatly reduced if the power is too low ,which will lead to two MOS conduction at the same time & burn MOS tube when lower than 12V
Aprilaire 413 Air Filter for Aprilaire Whole Home Air Purifiers, MERV 13 (Pack of 2)
- BUY WITH CONFIDENCE This genuine replacement air filter was designed and manufactured in the U.S.A. by Aprilaire – the leader in indoor air quality solutions, to optimize the performance of your Aprilaire Air Purifier Model: 1410, 1610, 2410, 2416, 3410, 4400, Aprilaire or Space Gard 2400 with upgrade kit
- CREATE A HEALTHIER HOME by preventing airborne allergens from circulating through the air in your home by trapping common airborne allergens from the air as it passes through the MERV 13 filter including dust, pollen, mold spores, bacteria, pet dander, and dust mites
- BETTER PERFORMANCE thanks to the patented Aprilaire Self-Seal Technology which minimizes the amount of air bypassing the filter
- EASY AS 1-2-3 TO INSTALL in the unique Aprilaire Interlock Rail System. Unpack. Slide in. Close the door. Done.
- WORRY FREE We stand behind the performance of our air filters with our 10-year Clean-Coil Commitment
A small change can make a big difference for the health of your home environment. Aprilaire delivers that difference with the Aprilaire 413 Healthy Home Filter. It removes common airborne allergens including dust, pollen, mold spores, bacteria, pet dander, and dust mites from the air as it passes through the MERV 13 filter.
In addition, your HVAC system is protected from airborne particles, which helps lower your energy costs, and can prolong the life of your equipment.
This replacement filter is easy to install, with no assembly or reinforcements to worry about. Our ‘Pure Fit Promise’ means this genuine Aprilaire filter will fit your Aprilaire air purifier exactly, and the patented Self-Seal Technology prevents contaminated impure air from bypassing the filter.
Discover a healthier home environment with the Aprilaire 413 Healthy Home Filter Replacement.
Note: MERV is a scale used to measure the effectiveness of air filters. Higher number values translate to more effective filtration. Choose the Aprilaire Filter with the MERV rating that fits the needs of your family and home.
Performance tested to ASHRAE 52.2
Standard, minimum efficiency reporting value – MERV 13
NEBOO FCR6 for Air Conditioner Fin Comb Set Straighten Evaporator Condensor Coils
Brand New – Unused Parts
part number FCR6
This is a Fin Comb Set
Six of the most popular fin combs on a convenient ring.
Straightens and cleans evaporator and condenser fin coils.
Combs included: Orange: 8 and 10 Fins Per Inch
Yellow 9 and 15 Fins Per Inch
Blue 11 and 13 Fins Per Inch
Green 12 and 14 Fins Per Inch
Lime 16 and 17 Fins Per Inch
Red 18 and 20 Fins Per Inch
Pure UV Whole House PCO UV Germicidal Light Air Purifier Activated Carbon TIO2 photocatalytic filter with magnet for HVAC Ac air conditioning coil. 16.75" long
- A powerful combination of Ultraviolet germicidal light with Activated carbon infused TIO2
- Sterilizes bacteria, viruses, mold and allergens, Activated Carbon removes VOCs, and odors from your home
- Improves indoor air quality for whole-house air purification
- It can be installed above or under the evaporator coil- see images. Replacement bulb available https://www.amazon.com/dp/B01GNEO4XK
- Magnetic bracket for easy installation, Plug in cord for any outlet. 16.75″ long
The Pure uv unit utilizes a magnet mounting system and a remote mounted power supply. The Pure UV Air Purifier is a PCO (Photocatalytic Oxidation) UV air purifier with activated carbon. The Pure-UV is installed into your home’s HVAC system via a magnet mounting system where it works to purify the air as it passes through utilizing a UV-C germicidal light and activated carbon. This combination is 50% more powerful at removing VOCs (volatile organic compounds), germs and odors from your home and it does not produce ozone! How the unit Works The unit is installed into your existing HVAC system. The purifier consists of a UV-C germicidal light and activated carbon, combining the power of UV light with carbon infused titanium dioxide (TIO2) to keep the air in your home pure and decontaminated all without producing harmful ozone! While most air purifying devices produce ozone, the Pure UV does not. We are able to do this by using UV-C light and an activated carbon matrix to cause photocatalytic oxidation PCO. Photocatalytic Oxidation converts odor molecules into water vapor and CO2, while the allergens, mold, germs and viruses are sterilized by the UV-C light . apco mag netic system for easy installation. 16.75″ long 2.5″ wide
Air Conditioner Condenser Fin and Refrigerator Coil Cleaning Whisk Brush
- PROFESSIONAL QUALITY – Same tool used by HVAC plumbing and heating contractors
- SAVE MONEY – Clean your appliances yourself and save expensive maintenance costs
- INCREASE EFFICIENCY – Regular cleaning of your appliance increases its efficiency and lowers operating costs
- MULTIPLE USES – Air conditioning units, refrigerators, fins, coils, evaporators, condensers, and more
- A MUST HAVE TOOL – Add this to your toolbox arsenal today!
Sunbeam King Heated Mattress Pad, Quilted Construction for Enhanced Comfort with 10 Heat Settings, 10 Hours Auto-Off, 18 inch Deep, 5 Year Warranty, KING
- Sunbeam, America’s #1 Heated Mattress Pad!
- Save up to 10% a year on your heating bills by turning on your heated mattress pad and setting your thermostat back by 10%-15%
- Easy to use multi-setting controller 10 heat levels, 10-Hour Auto-Off, Preheat Features
- 100 Percent Polyester, Fits Matresses up to 18 inches deep
- 5 Year Manufacturer’s Limited Warranty
Emerson Sensi Touch Wi-Fi Thermostat with Touchscreen Color Display, Works with Alexa, Black, Energy Star Certified
- Named the ‘Best Overall’ smart thermostat of 2018 by USA Today’s Reviewed.com.
- EXTENSIVE COMPATIBILITY***: Works with the HVAC equipment found in most homes – ALL system types require a common wire (c-wire). To check system and router compatibility, refer to our online compatibility resources at sensi.emerson.com/compatibility
- SAVE ABOUT 23% ON HVAC ENERGY*: The ENERGY STAR certified Sensi thermostat helps you save on your HVAC energy costs, with features like geofencing, 7-day flexible scheduling, remote access and energy usage reports.
- GET REBATES: Find utility rebates in your area through the rebate finder at sensi.emerson.com/rebates
- MOST INSTALL IN 30 MINUTES OR LESS**: Use the built-in level, illuminated easy click terminals and step-by-step in-app instructions for quick DIY installation.
- SMART HOME COMPATIBLE: Works with Amazon Alexa, Google Assistant, Apple HomeKit and Wink smart home platforms.
- CONTROL FROM ANYWHERE: Remotely control your home comfort from your smartphone or tablet using the free mobile Sensi app for Android and iOS devices.
- HD TOUCHSCREEN DISPLAY and ENHANCED FEATURES: Features HD touchscreen color display with backglow
- and smart alerts to detect extreme temperature and humidity levels in your home.
The Sensi touch Wi-Fi thermostat puts comfort control anytime, anywhere, at home or on-the-go. A tap of the easy-to-use touchscreen display or free mobile app allows for remote access to change or program home temperatures. Integrates with apple home Kit, Amazon Alexa and wink smart home platforms, and works with Google Home and Google assistant via the free wink app. Designed to work with HVAC (Heating, ventilation & air conditioning) equipment in most homes with its Universal compatibility: heat, Cool, heat pump, dual fuel – all system types require a common wire (c-wire). geofencing smart feature can automatically adjust temperature settings, or use the intuitive controls to create a custom Schedule. The color touch screen has unmatched clarity and usability. Connect to comfort in color with design features like intuitive menus, easy-to-read temperatures, precision temperature control, high/low temperature alerts, indoor humidity sensor, and keypad lockout.
Conclusion
By our suggestions above, we hope that you can found heating and cooling coils for you.Please don’t forget to share your experience by comment in this post. Thank you!
