Which Is The Best Automotive Cooling Fan Relays

Product Details:

— 100% brand new with high quality, durable to use.

— Material: Plastic and Metal

— Cable Length: approx. 165cm

— Voltage: 12V DC

Fitment:

Fit for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 Engines
Fit for 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines

Installation Guideline:

1. Mount the relay under the hood in a convenient location as to the fan as possible.
Notice: Don’t use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground threough the threads to the engine and the engine must be ground.
2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red terminal onto the black wire and attach to thermostat.
3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan.
4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay.
5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source. This wire is printed to battery / constant hot.
6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient.

PLEASE NOTICE:

— Please check the compatiblity to make sure correct fitment before purchase.
— Please allow 0.1-0.5cm difference due to manual measurement.

Package Includes:

1 Set Cooling Fan Thermostat kit

Product Description
Electric Fan:
Universal fit for hot rods, classic engines and modern vehicles.
Powerful 120 watt motor will keep your engine cool.
Configured as an air puller out of the box.
Blade and wiring can be reversed to make the fan an air pusher.
Material: Plastic Shroud/Steel Motor

Thermostat Kit:
Universal fit for any automotive application.
Activates by grounding electric fans at preset temperature.
3/8″ NPT thread-in brass probe w/ 1/2″ NPT adapter included.
Probe typically threads into radiator, water outlet hose or manifold.

Package includes:
1X 3/8″ NPT Thread-in Thermostat
1X 1/2″ NPT Adapter
1X Wiring Harness w/ Mount
1X 40 Amp Relay
1X 30 Amp Circuit Breaker
3X Small Ring Terminals
1X Large Ring Terminal
1X Harness Mounting Screw
2X Butt Connectors
2X Sheet Metal Screws
1X Female Connector
Just as pictures show

Application:
Universal

Premium adjustable fan control with push-in probe that installs in the radiator fin section includes wire harness and air conditioning override relay. It is adjustable from 160 to 210 degrees Fahrenheit. This control powers two fans up to 30 Amps.

Just like other major components in the car, the radiator cannot work on its own. It has supporting parts that help it perform its function more efficiently. In order for the radiator to reduce temperature of the water and coolant mixture that goes through the engine, it needs airflow that absorbs the heat and assists evaporation. Radiator fans are used to draw the air towards the radiator and help in the cooling process.

High Performance radiator fans may be used to replace your OE product for more efficient cooling. They allow more air to circulate around the radiator and they need less horsepower to operate too, making them ideal for your radiator fan replacement. Radiator Fans come with ultra slim design so the fan can be installed easily against your radiator, in the most convenient position to allow for more leniencies for other aftermarket parts.

Package Included:

Conclusion

By our suggestions above, we hope that you can found automotive cooling fan relays for you.Please don’t forget to share your experience by comment in this post. Thank you!