infratechplus 
Nowadays, there are so many products of food saver heating element in the market and you are wondering to choose a best one. You have searched for food saver heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings food saver heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
FoodSaver Repair Kit: Upper/Lower Gasket, Heat Strip Replacement 4 Foam Gaskets, 2 Strips Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers Replaces Food Saver T910-00075 by OutOfAir
- FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually.
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. However this will not fix a heating element that is not working at all. See product description for more details.
- INCLUDES: 4 Foam Gaskets & 2 Pieces of Replacement Teflon Tape with Adhesive Backing. If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models.
- WORKS WITH: V2200, V2400, V2800, V3000, V3200, V3400, and V3800 Series FoodSaver models. Also works with: GameSaver Deluxe Plus and Vac 800 Series — V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
- V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 Series(Lower Gasket Only): V3230, V3240, V3245, V3250 *** GameSaver Deluxe Plus
Is your FoodSaver vacuum sealer having trouble holding suction while sealing? Our gaskets may be able to help. Our gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models:
- V2200 Series
- V2000
- V2220
- V2222
- V2235
- V2240
- V2244
- V2250
- V2254
- V2260
- V2400 Series
- V2420
- V2430
- V2431
- V2432
- V2433
- V2440
- V2450
- V2460
- V2461
- V2470
- V2480
- V2490
- V2800 Series
- V2820
- V2830
- V2835
- V2840
- V2860
- V2865
- V3000 Series (Lower Gasket Only)
- V3020
- V3040
- V3200 Series (Lower Gasket Only)
- V3230
- V3240
- V3245
- V3250
- Others
- GameSaver Deluxe Plus
Is your machine having trouble sealing bags closed? If so, our replacement heat strip tape could help. Over time this tape can get worn out or dirty which can cause problems when the machine tries to seal the bags. Includes instructions for replacing the heat strip/tape.
3 Teflon Heat Tape Strips for Vacuum Sealers Fits FoodSaver, Weston, Seal-A-Meal, Cabelas, and Others (Made in USA) by OutOfAir
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. OutOfAir replacement Teflon tape is the highest quality available (Made in USA). Replacing your heat tape is recommended if it appears worn or you’ve run in to any problems with sealing.
- FITS ALL MACHINES: 3 Strips are each 18 inches long x 0.5 inches wide. These are purposely slightly longer and wider than necessary, simply trim length to fit your sealer model. The extra width gives you a bit more room to ensure proper coverage.
- PROTECT YOUR INVESTMENT: This tape is used to cover the heating element on your vacuum sealer machine. Worn out tape can cause problems when sealing, and could cause damage to your machine.
- WORKS IN ALL VACUUM SEALER MACHINES: OutOfAir replacement Teflon strips work in all vacuum sealers. Including FoodSaver, VacMaster, Weston, Cabelas, Rival, Seal-a-Meal, Ziploc and more.
- SAFE, CONVENIENT, RISK FREE: OutOfAir replacement strips are FDA Approved for direct food contact (-100 to 500F), and include a 60-day Money Back Guarantee.
With normal usage the tape protecting the heating element in most vacuum sealers doesn’t need to replaced as often as the gaskets, but if you are having issues with your bags not staying vacuum sealed, you may want to consider replacing the tape as it can help with inconsistent sealing.
How Do I Install My Replacement Tape?
To install:
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off).
2) Cut your new OutOfAir replacement tape to the correct size.
3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
And that’s it!
Will OutOfAir replacement tape work with my machine?
Yes it will. Works in all Vacuum and Impulse sealers that have a heating element for sealing bags.
For Vacuum Sealers you should place the tape directly over the heating element (after removing the current tape).
For Impulse Sealers you should place the tape directly under the heating element (after removing the current tape).
3 Teflon FoodSaver Replacement Strips for Vacuum Sealers – Fits FoodSaver, Rival Seal-A-Meal, Weston, Cabella’s and Nesco Models – Made in the USA
- Three 18-in long x 0.5″ wide Teflon strips with adhesive backing. Fit virtually all FoodSaver (TM) series, incl. 2000, 3000, 4000, 5000, GameSaver (TM) & Professional, and all Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) models
- Replaces deteriorated or burnt-out Teflon tape / PTFE tape, which is a crucial barrier between the heating element and the bag in your heat sealer machine. Old tape causes poor sealing and can lead to a broken heating element and a broken sealer
- Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect
- Ideal for virtually all FoodSaver (TM) models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston (TM) Pro 2100, 2300 and more
- Peel and stick backing – easy to apply. Simple-to-follow instructions included. Over the wire for vacuum sealers, under the wire for impulse sealers. Please note: This is an aftermarket replacement product (produced by Impresa Products). Trademark IMPRESA.
(3) 18″ x 0.5″ IMPRESA Teflon strips with adhesive backing. Fit virtually all FoodSaver series, including 2000, 3000, 4000, 5000, GameSaver and Professional, as well as virtually all Weston, Cabella’s, Nesco and Rival Seal-A-Meal models. Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the vacuum bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer. Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect. Peel and stick backing makes our vacuum sealer tape easy to apply. Simple-to-follow instructions included with package. Over the wire for vacuum sealers, under the wire for impulse sealers. Great for Weston Pro 2100, 2300 and more. Perfect piece of the solution when looking for replacements for FoodSaver (TM) parts, FoodSaver (TM) teflon / teflons for FoodSaver (TM) / Food Saver (TM) teflon tape / FoodSaver (TM) teflon tape, Rival Seal A Meal (TM) parts, etc. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) OEM product and Impresa Products has no affiliation with or endorsement from FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM). Our product is not covered under any FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) manufacturer’s warranty. The FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names and logos are the registered trademarks of their owners. Any use of the FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility.
16" Hand Impulse Sealer Repair Kit 2 Element 2 Cloth Set Spare Parts
Complete Repair Kit for 16″ Hand Impulse Sealer. Ensure a perfect seal everytime.
This repair kit comes with 2 wire elements & 2 cloth tape.
Easy to replace and repair!
Food Saver Replacement Gasket Vacuum Sealer Upper and Lower Gasket Assembly 4-Pack Fits Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 Series
- FIT PERFECTLY & WORK WELL: If your old sealers have deteriorated and weakened the vacuum, losing its suction. Replace the gaskets then you will make your vacuum sealer machine operates like new. Your foodsaver will vacuum sealing again
- FIT MOST SERIES: Our Replacement Foodsaver gasket fits all food saver V2200, V2400, V2800, V3000, V3200, V3400 and V3800 series models. Corresponds to Foodsaver part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
- INSTALLED EASILY: Easily slid right into the channel for the gaskets. Installing a FoodSaver gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated. Make the vacuum sealer sucks air much faster like new
- 4-PACK: Have a spare set of gaskets for the future. SAVE MONEY AND ENJOY LIFE
- 100% GUARANTEE: You will be satisfied with our foodsaver replacement gasket, if you are unsatisfied, we will refund the money unconditional, just tell us directly
If your old foodsaver vacuum sealer has deteriorated and weakened the vacuum, losing its suction. Are you going to buy a new one machine?
STOP IT! Installing a foodsaver gasket replacement helps improve suction and vacuum sealing performance. This will makes your machine work like new again.
Just cost less $10 instead of $150, you will get a new foodsaver vacuum sealer again.
Our items is perfect replacement for your foodsaver vacuum sealer foam gasket for models with 1 or 2 gaskets.
Fits all food saver V2200, V2400, V2800, V3000, V3200, V3400 and V3800 series models.
V2200 series: V2220, V2222, V2240, V2244, V2250 and others
V2400 series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490
V2800 series: V2820, V2830, V2835, V2840, V2841, V2842/3, V2860, V2865
V3000 series: V3020, V3040 and others
V3200 series: V3240, V3250 and others
V3400 series: V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485
V3800 series: V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880
4-PACK in one bag, save your money and we have 100% guarantee money refund with unconditional in 1 year.
PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) – Fits FoodSaver, Seal A Meal, Weston, Cabella’s by IMPRESA
- 1/2″ wide x 30 foot long Teflon tape / PTFE tape roll with adhesive backing. Fits virtually all FoodSaver, Weston, Cabella’s, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers
- Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer
- Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn’t perfect
- Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers
- Ideal for virtually all FoodSaver models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston Pro 2100, 2300 and more. By IMPRESA (TM)
NEW Made in USA
ApplianPar 4 Pack Replacement Vacuum Sealer Upper Gasket Assembly for Food Saver V2200 V2400 V2800 V3000 V3200 V3400 V3800 V3840 Series
- Fits models: V2200 series V2220, V2222, V2240, V2244, V2250 , V2400 series V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490, V2800 series V2820, V2830, V2835, V2840, V2841, V2860, V2865, V3000 series V3020, V3040, V3200 series V3240, V3250, V3400 series V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485, V3800 series V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880 etc
- Gasket replacement helps improve suction and vacuum sealing performance when vacuum sealer gaskets have deteriorated, Make the vacuum sealer sucks air much faster like new
- Package includes: 4 x Vacuum Sealers Gasket
4 Pack Replacement Vacuum Sealer Upper Gasket Assembly for Food Saver V2200 V2400 V2800 V3000 V3200 V3400 V3800 V3840 Series
4-Pack FoodSaver Gasket Replacement – Vacuum Sealer Upper Gasket Assembly – Fits V2200, V2400, V2800, V3000, V3200, V3400, V3800 Models (Corresponds to Food Saver T910-00075) – By Impresa Products
- PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated
- RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
- BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission
- FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, V2841, V2860, V2865), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880)
- Note: This is an aftermarket replacement product meeting or exceeding the quality of OEM gaskets (based on in-house testing), produced by Impresa Products (TM). Not for use with non-FoodSaver (TM) vacuum sealers or FoodSavers (TM) with rubber gaskets
TESTED, TRUSTED AND BACKED BY OUR TOP-RATED WARRANTY AND CUSTOMER SERVICE!
PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated
RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission
FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, etc.), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, etc.), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, etc.)
This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM) OEM product and Impresa Products (TM) has no affiliation with or endorsement from FoodSaver (TM). Our product is not covered under any FoodSaver (TM) manufacturer’s warranty. Brand names/logos are the registered trademarks of their owners. Use of the FoodSaver (TM) brand names, models, etc. are made solely for purposes of describing and illustrating compatibility
FoodSaver Upper and Lower Gasket Assembly Replacements (4 Foam Gaskets) – Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers (Replaces Food Saver T910-00075) by OutOfAir
- FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually.
- FOAM GASKETS: If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models.
- WORKS WITH: V2200, V2400, V2800, V3000, and V3200 Series FoodSaver models. Also works with: GameSaver Deluxe Plus.
- V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
- V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 Series(Lower Gasket Only): V3230, V3240, V3245, V3250 *** GameSaver Deluxe Plus
If your FoodSaver vacuum sealer is having trouble holding suction while sealing, our gaskets may be able to help you. These gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models:
- V2200 Series
- V2000
- V2220
- V2222
- V2235
- V2240
- V2244
- V2250
- V2254
- V2260
- V2400 Series
- V2420
- V2430
- V2431
- V2432
- V2433
- V2440
- V2450
- V2460
- V2461
- V2470
- V2480
- V2490
- V2800 Series
- V2820
- V2830
- V2835
- V2840
- V2860
- V2865
- V3000 Series (Lower Gasket Only)
- V3020
- V3040
- V3200 Series (Lower Gasket Only)
- V3230
- V3240
- V3245
- V3250
- Others
- GameSaver Deluxe Plus
FoodSaver Vacuum Sealer Upper Gasket Assembly T910-00075 – For All V2400, V2800, V3400, and V3800 Series (2 Gaskets)
- Fits all V2200, V2400, V2800, V3400, and V3800 Series FoodSaver models
- Includes 2 Foam Gaskets
- If your FoodSaver has 2 foam gaskets it is recommend that you replace both of them at the same time.
- V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490, V2820, V2830, V2835, V2840, V2860, V2865
- V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485, V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880
If your FoodSaver vacuum sealer is having trouble holding suction while sealing, this gasket may be able to help you. This gasket replaces the foam gasket in your FoodSaver to help improve suction and it’s ability to hold the vacuum in the bag while sealing.
This gasket fits all V2200, V2400, V2800, V3400, and V3800 Series FoodSaver models.
Compatible with all of the following models:
V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490
V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
V3400 Series: V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485
V3800 Series: V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880Note: Some models have 2 foam gaskets, some have 1 foam and one rubber gasket. If your FoodSaver has 2 foam gaskets you may want to replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket.
Conclusion
By our suggestions above, we hope that you can found food saver heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
