infratechplus Finding your suitable readers for 3m hardener is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 3m hardener including detail information and customer reviews. Let’s find out which is your favorite one.
520 reviews analysed
Bondo Red Cream Hardener, 00928, 2.75 oz
Bondo Red Cream Hardener is designed to be used with Bondo Body Fillers, Bondo-Glass Bondo-Hair and Fiberglass Resin Jelly. Formulated and packaged under temperature-controlled conditions which assures freshness and maximum performance.
3M 05830 Red Creme Hardener – 2.75 oz. Tube
3M cream Hardener is a hardening agent designed to work with our 2-part 3M, dynatron and Bondo fillers, putties and glazes. The creamy consistency mixes easily and quickly. Our Hardener combines the best of ease of use and quality final results. The hardeners should not be used by themselves.
3M Platinum Plus Filler, 01131, 1 gal
- Adhesion promoted for excellent adhesion to many surfaces
- Advanced formula recommended for use with galvanized steel and aluminum
- Super creamy formula spreads easily for quick applications
- Vacuum processed and pinhole free for ultimate in purity and quality
- Fast curing allows sanding in a little as 15 to 20 minutes
- For use with the 3M Dynamic Mixing System (DMS)
3M Platinum Plus Premium Body Filler is a super creamy formula that achieves extreme adhesion to Galvanized Steel, Aluminum, E-Coat, Fiberglass, SMC, cured Epoxy, Urethane and Primers.
Bondo Fiberglass Resin, 00402, 0.9 Quart
- For repairing, resurfacing and rebuilding a range of materials
- Can be used alone as a sealer
- Compatible with all paints including gel coat and marine paint
- Includes Bondo Fiberglass Resin Liquid Hardener for convenient, accurate mixing
- Use during the Fill stage of the 3M Body Repair System
Bondo Fiberglass Resin is a strong material commonly used for autos, boat building and other repairs. This high-strength polyester resin can be used with fiberglass mats or cloths on surfaces including fiberglass, wood, metal and masonry to repair metal rust-outs and to recreate or join surfaces. It can also be used by itself as a wood or concrete sealer. It accepts nearly any paint system.
Bondo Fiberglass Resin, 00404, 0.9 Gallon
- Bondo Fiberglass Resin is the same high-strength polyester resin that is used to build most boats
- Can be used alone or with fiberglass tape, cloth or mat to repair damaged fiberglass boats, snowmobiles, jet skis, bathtubs and showers
- Can also be used as a sealer on damaged and rotted wood
- Sandable in less than 2 hours
- Compatible with all paints, including gel coat and marine paints
- Can be used alone or with fiberglass tape, cloth or mat
- Can also be used as a sealer on damaged and rotted wood
- Great on large or small metal rust-outs
- Creates a strong and long lasting bond
- Sandable in less than 2 hours
Bondo Fiberglass Resin is the same high-strength polyester resin that is used to build most boats. Can be used alone or with fiberglass tape, cloth or mat to repair damaged fiberglass boats, snowmobiles, jet skis, bathtubs and showers. Can also be used as a sealer on damaged and rotted wood. Seals concrete, is great on large or small metal rust-outs and joins most surfaces together while creating a strong and long lasting bond. Sandable in less than 2 hours. Compatible with all paints, including gel coat and marine paints. Waterproof. Includes Liquid Hardener.
Fibreglass Evercoat 359 Cream Hardener – Blue – 4 oz. Keg
Good filler needs a good hardener to achieve the best results. Cream hardener is also available in red and white.
Bondo Glass Reinforced Filler, 00272, 1 Quart
- Fiberglass strands and fibers make it twice as strong as regular body filler
- Covers small (up to ½ Inch) holes without the need for backing strips, fiberglass resin or cloth
- Excellent as a foundation for hole, dent and rustout repair
- Can be paired with body filler and glaze for complete repairs
- Sandable in as little as 20 minutes for quick repairs
- Compatible with most paints
Bondo Glass Reinforced Filler makes an excellent foundation for hole, dent and rust-out repairs without the need for backing strips, cloths and resins. It contains short, interlocking fiberglass strands and fibers that make it twice as strong as regular body filler. It is also slightly thicker and provides a fast drying time, making the filler less messy on vertical surfaces like car doors.
Bondo 265 Lightweight Filler Can – 1 Gallon
Bondo Auto Body Filler is a two-part putty compound that can be used to repair dents, dings, holes, rusted areas and scratches in vehicle exteriors. Bondo Body Filler cures fast, shapes in minutes and is formulated to be a non-shrinking and permanently durable material. In addition to its uses on vehicle exteriors and other metal surfaces it is also a suitable repair option for wood, fiberglass and concrete.
View larger.
How It Works
Bondo Auto Body Filler consists of two compounds: a resin based filler and a hardening agent. A tube of the hardening agent is included with the container of Bondo Auto Body Filler. The consistency of both compounds is creamy, but as the hardening agent is blended together with the filler it acts as a catalyst, creating a chemical reaction which thickens the new mixture into a paste. Bondo Auto Body Filler products include directions containing simple mix ratios that make for convenient measuring out of both compounds without any waste.
The compounds should be blended away from the area to be repaired on a handheld mixing palette or other maneuverable flat surface using a flat edged spreading tool (palette, spreading tool and recommended eye protection, mask and solvent resistant gloves sold separately). The result is a rapidly thickening adhesive mixture that can be spread on and will stick to correctly prepared surfaces and spaces. The mixture cures quickly, shapes in minutes and will accept as many reasonably applied applications as required to fill holes and deep scratches or dents. It is is formulated to be a non-shrinking and permanently durable material. Once completely hardened Bondo Auto Body Filler can be sanded using various grits to achieve as smooth a finish as required. The filled, area as well as the area immediately surrounding it should be covered with Bondo Glazing and Spot Putty (sold separately). Feather sanding this creates a consistent sloping surface that can then be painted with standard gray auto primer and an outer coat and clear coat finish. In addition to its uses in repairs of typical vehicle surfaces Bondo Auto Body Filler is also suitable for repairs of other surfaces including wood, steel, aluminum, fiberglass, and concrete.
Instructions*
- Clean the vehicle with soap and water, followed by a solvent cleaner. Adhesive Remover from 3M is a great product for this step. This is important as any contaminants (wax, bug residue, tar, dirt) remaining when sanding begins are ground into the surface as they could compromise the adhesion of repair materials.
- When repairing any dent it is best to remove as much of the dent as possible prior to filling with body filler. An assortment of slide hammers, hammers, dollies and picks may be needed to perform this step. Always use appropriate eye and respiratory protection.
- After the dent is roughly removed it is time to start sanding. Use a sanding block or random orbital sander with 80 grit abrasive to remove all paint to approximately 2″ around the dent.
- Using proper techniques mix Bondo Body Filler from 3M and apply to the dent in thin layers. The first layer should be applied with firm pressure to ensure good adhesion. Avoid over-application of filler as this just requires additional sanding. Let dry for 15 to 20 minutes, dependent on temperature and humidity.
- Select a sanding block that is appropriate for the size of the repair and attach a 80 grit abrasive sheet. Rough shape/sand the repair area. Always keep your block flat to the surface. Avoid over-sanding with 80 grit or the finished repair area will be low. If low spots are detected, it may be necessary to apply more body filler and repeat this sanding step.
- Once satisfied with the rough shape of the repair, attach an 180 grit abrasive sheet to the sanding block and final shape the repair. After this step, the repair should be level and there should be no 80 grit scratches remaining. The body filler should also have a smooth featheredge all around the repair.
- Attach a 180 grit abrasive to the sanding block to featheredge the paint away from the body filler and remove all straight line scratches.
- Mix Bondo Professional Glazing and Spot Putty from 3M and apply to the entire repair area overlapping the body filler and paint featheredge. Allow 15 minutes to dry, depending on the temperature and humidity.
- Apply a 180 grit abrasive to the sanding block and sand the repair area until level. Remember to keep the block flat to the surface at all times and do not over sand.
- Apply a 320 abrasive grit to your sanding block and remove all straight line scratches from the paint around the filler area. Once complete the repair is ready for the application of primer surfacer and topcoats. It’s very important to follow the paint manufacturer’s instructions for your specific brand of primer or paint.
Key Features
- Original formula for fast easy repair and restoration of your vehicle
- Ideal for repairing dents, dings, holes, large rusted areas and scratches
- Lightweight and sands easily
- Formulated to be a non-shrinking, non-reactive and permanently durable material
- Includes cream hardener
- Can also be used for repairs to wood, aluminum, concrete and fiberglass surfaces
Limitation of Liability
Each Bondo product is sold subject to the limitation that 3M will not be liable for any loss or damage arising from use of the product whether direct, indirect or special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
What’s in the Box
- Gallon container of Bondo Auto Body Filler
- 2.75 oz. tube of Bondo Cream Hardener
About Bondo and 3M
In 2007 the Bondo Corporation was acquired by 3M. 3M is proud to continue its tradition as one of the leading manufacturers and marketers of specialty repair and restoration products for the automotive, industrial, marine and home DIY markets. 3M’s product offerings in these areas have been extended with products that are known worldwide under the brand names of Bondo, Bondo Home Solutions, Marson, Dynatron, Mar-Hyde, Bondo Marine and Laminex.
* Read all directions and warnings for safe and proper application.
Bondo 3004.7858 201224-4PK All Purpose Fiberglass Resin, 28.8 Fluid Ounces
- Bondo All-Purpose Fiberglass Resin is 100% waterproof
- For interior and exterior repairs
- Product cures in 2 hours, resulting in a non-shrinking and durable repair
- Compatible with all paints and gel coats and includes Bondo Fiberglass Resin Liquid Hardener
- Use for small to very large repairs to any fiberglass, metal, wood or masonry surface.
- 1 Quart Can
Conclusion
By our suggestions above, we hope that you can found 3M Hardener for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3M Hardener, eg:
- What are Top 10 3M Hardener for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3M Hardener to buy?
- What are Top Rated 3M Hardener to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3M Hardener?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3M Hardener.
- Before deciding to buy any 3M Hardener, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3M Hardener and What you should consider when buying the 3M Hardener and Where to Buy or Purchase the 3M Hardener. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3M Hardener of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3M Hardener.
