infratechplus 
Nowadays, there are so many products of 3m 6 in sanding disc hook and loop in the market and you are wondering to choose a best one. You have searched for 3m 6 in sanding disc hook and loop in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3m 6 in sanding disc hook and loop which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
49,231 Reviews Scanned
3M 05777 Hookit 6" x 1/2" x 3/4" Soft Interface Pad
- Soft foam construction conforms to contours for a finer finish
- Adds support to disc pad for improved abrasive cut and closer edge sanding
- Applies effortlessly between Hookit discs and Hookit back-up pads for quick changeouts
- Hole configurations help clear dust from the work surface, increasing disc life
- Reduces vibration from orbital sanding tool for improved results
3M 01812 Hookit 334U Purple 6" P320C Grit Clean Sanding Disc
- Ideal for painting and finishing applications
- Stearate coating to prevent loading and provide a consistent finish
- resin bonded for heat resistance
- Constructed of a carefully graded, higher performance aluminum oxide mineral on C-weight paper backing
- Sale unit: BOX
Disc with precise hole design for improved life and dust extraction. Use for fine featheredging or last final sanding step before priming. 3M’s fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Suggested backup pads PN05551, PN05865 and PN05777 interface pad.
Similar items with 4 stars and above
3M NX Hook and Loop Paper D/F Disc, 6 Holes, Aluminum Oxide, 6"Diameter, P220 Grit (Pack of 50)
- Six-hole design allows dust evacuation from the disc surface to prevent loading, increase productivity, and provide a cleaner work environment (when used with a vacuum)
- Hook-and-loop feature provides reliable attachment and facilitates easy disc change and re-use
- Durable paper backing is suitable for dual action or random orbital sanders (D-weight paper for grades 40, P60, P80
- C-weight paper for grades P100–P800)
- Aluminum oxide mineral is durable, cuts fast, and performs well on many surfaces
- Load-resistant coating helps prevent premature loading of the disc surface to maximize cut and extend the life of the abrasive grains
Product Description
An aluminum oxide dust free disc constructed on a C weight, intermediate paper backing. Featuring an anti-loading stearate coating. General purpose. Good value. Load resistant. Hook and loop attachment for easy re-use. Dust control. Attachment type: hook and loop. Coat type: open coat. Color: white. Converted form: dust free disc, Hookit/hook and loop disc. 6″ Diameter. Equipment – machines: random orbital sanders. Grade: P220. Maximum OPM: 12000. Maximum RPM: 12000. Number of holes: 6. Position: good.
From the Manufacturer
The 3M™ NX Hook and Loop Paper Dust-Free Disc is ideal for use with portable sanders on a variety of substrates where dust-control is a concern. It offers aggressive cut and long life along with dust-free sanding. Constructed of aluminum oxide abrasive on intermediate-weight paper (D-weight for grades 40, P60, P80; C-weight for grades P100–P800), it is well suited for high production operations as well as general purpose applications on whitewood, metal, composites, primer, paint, sealers, and topcoats. The 6-hole dust management feature works with a vacuum system (not included) to control dust in the air and on the workpiece, while an open coat construction and a load resistant coating help prevent clogging when working with softwoods or paint. The disc features a hook-and-loop backing that provides ease of attachment and reuse, and the durable paper backing stands up to extended use with dual action or random orbital sanders.
The 6-hole pattern dust management system uses a series of evenly-spaced holes in the abrasive disc that are aligned with the holes in the backup pad, and is used on 6″ discs. When used with a vacuum system and 3M™ 6-hole dust-free backup pad (both sold separately), suction is drawn through the holes to help collect the dust from the air and on the workpiece, for improved working conditions and increasing productivity. A load-resistant coating further prevents wood dust, paint particles, and other debris from prematurely clogging the surface of the disc, optimizing cut-rate and disc life.
Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Hook and Loop sanding discs are designed to be used with a random orbital sander, a handheld sanding machine that rotates the disc in a random pattern to prevent swirl marks from forming on the surface of the workpiece. The sander is fitted with a disc pad (or backup pad), to which the sanding disc is attached. Hook-and-loop discs are quick and easy to change when switching from one grade to another, and can be reused again and again until worn out (whereas adhesive-backed discs are typically discarded after one use because the adhesive backing will not re-adhere a second time).
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.
3M 02088 Trizact Hookit 6" P1500 Grit Clear Coat Sanding Disc
3M 05776 Hookit 6" Disc Pad
3M (MMM5576) DISC PAD STIKIT 6IN [Misc.]
- The disc pad easily integrate higher performance into a wide range of power sanding applications.
- Durable foam body provides yield for consistent abrasive contact, increases pad life.
- Edges tapered 15 or 45 degrees for flat or contoured sanding jobs.
- Fits right in – 5-hole, 6-hole or center mount pads to work with most orbital sanders.
- Medium or firm densities provide versatility for light to aggressive sanding.
These back-up pads perform across a large variety of auto body sanding jobs from low-speed polishing and grinding to shaping plastic filler. Durable foam construction and tapered edges maximize performance with 6- or 8-inch diameter 3M Stikit abrasive discs (sold separately). Pads work as part of the 3M Stikit system for fast disc changes, optimizing time and disc life. These pads are designed to fit right into your auto body operation, immediately boosting performance across a range of sanding applications. Choose disc back-up pads built for RPMs from 1,500 to 10,000 – great for shaping plastic filler, flat sanding, low-speed polishing or grinding, and for use with medium to fine grade abrasives during paint stripping and sanding primer on conformable surfaces. Pads are available with edges tapered 15 degrees, ideal for aggressive sanding on flat surfaces, or 45 degrees for contours. Each medium or firm density disc pad is balanced, lightweight and resistant to shock. Durable foam construction provides flexible abrasive disc support for consistent contact with the work surface. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3M(TM) Hookit(TM) Disc Pad 05775, Hook and Loop Attachment, 5" Diameter x 3/4" Thick, 5/16"-24 External Thread, Yellow(Pack of 1)
- Regular type disc pad use with 5 inches diameter Hookit(TM) discs
- Made with a resilient backing plate assembly and a medium density foam for durability
- Fits random orbital sanders with 5/16 inch-24 internal thread
- Yellow color
- 5/16″-24 thread size
- Ideal for use with medium to fine grade abrasives for paint stripping and sanding primers
- Firm yellow foam pad with a moderately flexible edge – good for flatter surfaces
- Appox. 45° tapered edge allows for sanding curves as well as close to moldings
- Hookit pad face holds the disc securely, allowing easy attachment and removal
- Diameter: 5 IN
- Center Hole: 3/4 IN
3M Hookit Paper Disc 236U, P80 C-weight, 6 in x NH, Die 600Z
- Premium aluminum oxide mineral is durable, cuts fast, and performs well on many surfaces
- Strong, C-weight paper backing supports aggressive sanding with extra durability compared to lighter weight paper backings
- Open coat construction and load-resistant coating prevent premature loading of the disc surface to maximize cut and extend abrasive life
- 3M Hookit discs are easy to change and reuse, maximizing sanding utility for the life of the disc
- Hook-and-loop feature provides reliable attachment
Product Description
3M Hookit Paper Disc 236U offers aggressive cut and long life on a premium aluminum oxide disc with a durable edge and convenient Hookit attachment. A go-to product in many industrial operations, this durable disc is well suited for high production sanding operations as well as general purpose applications on paint, primer, wood, metal, plastic, and composites, including fiberglass.
From the Manufacturer
3M™ Hookit™ Paper Disc 236U offers aggressive cut and long life on a premium aluminum oxide disc with a durable edge and convenient Hookit attachment. A go-to product in many industrial operations, this durable disc is well suited for high production sanding operations as well as general purpose applications on paint, primer, wood, metal, plastic, and composites, including fiberglass. Designed for use with a random orbital sander, the strong C-weight paper backing resists tearing and edgewear during aggressive sanding, and the disc is resin-bonded for heat-resistance, further increasing life and cut. These discs also feature an open coat and a load-resistant coating to enhance dust management and cut-rate.
A load-resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the surface of the disc and hinder sanding ability. Loading is further reduced by an open coat, which means the abrasive grains are spaced slightly apart so that dust can escape rather than obstructing the cutting edge of the grains, thereby optimizing cut-rate and disc life.
Sanding discs come in a variety of forms to fit various power tools and disc pads. A 3M™ Hookit™ Disc conveniently and firmly attaches to a 3M™ Hookit™ Disc Pad (sold separately) on a random orbital sander. Hookit discs are quick and easy to change when switching from one grade to another, and can be reused again and again for the extent of the disc life (whereas adhesive-backed discs are typically discarded after one use because the adhesive backing will not re-adhere a second time).
Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.
3M Clean Sanding Soft Interface Disc Pad 28321, Hook and Loop, 5" Diameter x 0.50" Thick (Pack of 1)
3M 05778 6" Painter’s Disc Pad with Hookit
Soft backup pad with Hookit attachment to be used primarily in the paint department.
Similar items with 4 stars and above
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3m 6 in sanding disc hook and loop, eg:
- What are Top 10 3m 6 in sanding disc hook and loop for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3m 6 in sanding disc hook and loop to buy?
- What are Top Rated 3m 6 in sanding disc hook and loop to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m 6 in sanding disc hook and loop?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m 6 in sanding disc hook and loop.
- Before deciding to buy any 3m 6 in sanding disc hook and loop, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3m 6 in sanding disc hook and loop and What you should consider when buying the 3m 6 in sanding disc hook and loop and Where to Buy or Purchase the 3m 6 in sanding disc hook and loop. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3m 6 in sanding disc hook and loop of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m 6 in sanding disc hook and loop.
Conclusion
By our suggestions above, we hope that you can found 3m 6 in sanding disc hook and loop for you.Please don’t forget to share your experience by comment in this post. Thank you!
