infratechplus 
Nowadays, there are so many products of clear water filter housing 10 in the market and you are wondering to choose a best one. You have searched for clear water filter housing 10 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings clear water filter housing 10 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
44,188 Reviews Scanned
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Geekpure 10 Inch Big Clear Water Filter Housing for Whole House Water Filtration with Wrench and Bracket 1 Inch Inlet Outlet-4.5 x 10 Inch – Clear Color (Pack of 1)
- Complete set 10 inch big clear housing,1″NPT inlet/outlet,with plastic wrench,screw and metal bracket.
- Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.Fits NSF standard,Large capacity housing for high flow applications.
- It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.
- ADVANTAGE-clear housing allows you to see when you need to change filters and everything else works as it should.
- Pack of 1,Filter housing only, filter cartridges are sold separately .
Geekpure 10-Inch Big Blue Whole House Water Filter Housing 3/4-Inch Outlet/Inlet with Wrench and Bracket -4.5"x10"-Clear
- COMPLETE-Complete one set 10 inch big blue housing,3/4″NPT plastic inlet/outlet,with pressure release button for high flow,plastic wrench and metal bracket.Housing only, filter cartridges are sold separately.The clear housing allows you to see when you need to change filters and everything else works as it should.
- STANDARD-Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges,Clear housing, easy to monitor the product water quality.
- HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications.
- WARRANTY-One year limited warranty,30 Days Money Back Guarantee.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA).
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers Clear Housing
- FUNCTION-Replacement housing for RO system,Widely used in RO system or pre-filtration.Clear housing allows you to see when you need to change filters and everything else works as it should.
- UNIVERSAL-Standard size for most RO systems using standard 10″ filters.
- INLET-OUTLET-1/4″ female threaded in and out fittings. NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- SIMPLE INSTALLATION-Easy to replace.Food grade AS will not cause pollution to water.
- Just Housing in the box, matched wrench ASIN: B07D9JWRYQ ,matched quick fitting ASIN:B078VQN6TZ .
10" Big Blue Housing Whole House Water Filtration System 1" Inlet/Outlet Brass Ports Pressure Relief Button, Meets NSF Standards & Regulations COMPATIBLE to BB-20B, 150233, 150235 (1 Set, Transparent)
- ???? DURABLE STRUCTURE: 10” Transparent Big Blue Housing Set is proper for high-flow and heavy sediment applications. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The black cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes.
- ???? POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
- ???? EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.
- ????ACCEPTS 10”x 4.5” Big Blue Water Filter Cartridges as: Ronaqua, 3M 70020162437, DuPont WFHDC8001, Watts MAXETW-FF975, KX Technologies 32-425-125-975, ClearChoice 84629, Liquatec CB-450-975-05, SDF-45-1005, MATRIKX-CTO2-HD10, Pelican CB-BB-10, EP-BB, EPM, CCBC & CEP Series, Fette Filter COMIN18JU061077, Pentek 155548-43, DGD-5005, Trojan CB-BB-10, WCBFF975, American Plumber WDGD-5005, Aqua-Pure AP810, AP814 and AP811, Hydronix SDC-45-1005, Pentair DGD-5005, 9108-44, DEV9108-44 (Sold Separately)
- ???? WELL-MATCHED MODELS OF HOUSINGS: Pentek 150237, 150469, 153029 #10, BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Hydronix HX-HF45-10CLBK10 and HF45-10BLBK15, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M
Similar items with 4 stars and above
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
Geekpure 10 Inch Whole House Big Blue Water Filter Housing 4.5" x 10"-1-Inch Inlet/Outlet with Wrench and Bracket-Blue Color (1)
- 10 Inch Housing-Complete one set 10 inch big blue housing,1″NPT inlet/outlet,with pressure release button for high flow,with plastic wrench and bracket, filter cartridges are sold separately.
- STANDARD-Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.
- HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications.
- WARRANTY-One year limited warranty,30 Days Money Back Guarantee.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA).
Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2"
Geekpure 10-Inch Standard Slim Line Blue Filter Housing for 2.5" x 10" Filter -3/4" Brass Female NPT Inlet/Outlet with Pressure Relief Wrench and Bracket
- COMPLETE-Complete 1 set 10 inch blue housing,3/4 inch brass ports with pressure relief button for high pressure,with plastic wrench and bracket.
- STANDARD-Fits all standard sized 2.5 inch x 10 inch filters housing only, filter cartridges are sold separately.
- APPLICATIONS-Used for whole house, reverse osmosis water filtration system.
- WARRANTY-Fits NSF standard.One year limited warranty.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA),30 Days Money Back Guarantee.
Conclusion
By our suggestions above, we hope that you can found clear water filter housing 10 for you.Please don’t forget to share your experience by comment in this post. Thank you!
