The 10 Best Tee Fitting Plastic Hot Water

What is it?

PureSec 2017 UTA14X3 mini white plastic quick fitting union tee connector is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools.Operated by hand, it replace threaded or flanged connections, which require wrenches. It is used to branch off to different outlets for your RO unit.This Tee connector fits standard OD 1/4″ Copper, CPVC, PEX and PVC tubing for most RO systems

Where to use it ?

Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for Tee in a water line going to your fridge or T off your water line under your sink for a filtration system as well as run two reverse osmosis faucets in back to back bathrooms from a single R/O unit. This will take the headache out of an under counter water filter installation

How to use it ?

Just pop in your 1/4″ tubing into each end, pushing until it won’t go in. To remove, just push in the outer circle on each end and pull right out. You need to make sure the tubing is cut squared to insure no leaks. Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it’s crooked, or not inserted all the way, or crimped, it may leak

PureSec 2017 UTA14X3 mini white plastic quick fitting union tee connector is quality, reliability, and economy in potable water service.

What’s in the parcel?

PureSec 2017 UTA14X3 mini white plastic quick fitting union tee connector

“C” clip

Everflow female centre tees 3/4 inch Push-to-Connect x 3/4 inch Push-to-Connect x 3/4 inch Female National Pipe Thread (FNPT) center Tee is used to connect copper and CPVC pipes. It is a Lead free DZR brass construction for durability and reliability. The centre tee allows for the fitting to be inserted onto the pipe and then using the disconnect tool slipped back onto the other end of the pipe. This allows for up to a 2 inch section of the pipe to be removed and then repaired without having to add additional pipe. This tee is perfect for removing a section of pipe and adding in an expansion tank for your water heater, the FNPT Tee is threaded so you can screw in the Expansion tank after installing the tee to the line.

SPECIFICATIONS & APPROVALS:

Certified to 200 PSI WOG and 200°F
Certified by UPC / IAPMO, To meet Lead-Free Potable Water Laws.
ANSI/NSF-14/G Compliant & AWWA C800 Compliant
Meets ASME B1.20.1, ASSE 1061
Manufactured in an ISO Accredited Facility

Product Description

3/4″ x 3/4″ x 3/4″, lead free, female iron pipe, center slip tee, Shark Bite push fit fittings for use with copper tubing copper tube size, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to asset 1061/Nsf61 standards, meets upc, ipc & cupc requirements, fittings are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, lead free Compliant to federal law 111-380, bagged. Connects copper or CPVC pipe only.

From the Manufacturer

SharkBite U3486LFA Slip Tee 3/4-Inch X 3/4-Inch X 3/4-Inch FNPT Female Center Lead Free

Specification:
Material: Brass
Finished: Chrome
Color: Silver
Weight: 110g
Dimension: 52mm*21mm*21mm

Thread specifications: 
1/2″ female thread, 1/2″ male thread, 1/2″ male thread

Package:
1 x Water Diverter

Features:
SOLID BRASS & CHROME
Solid brass, full metal, quality assurance. Strong brass construction, made in one piece, ensuring quality and longevity; corrosion resistance, ductility at high temperatures, and low magnetic permeability. Better than plastic in pressure and burst resistance. Polished chrome finished creates a bright, cool look. Not easy to rust.

1/2″ STANDARD
The size is 1/2″ female thread, 1/2″ male thread, 1/2″ male thread. It is a tee fitting with three openings for connecting. Female and male threads on two ends and male threads on the branch for connecting, firm tight fitting, no leaks. Teflon tape is recommended for threaded joints.

T-shape 
The tee fitting diverter is T-shaped and has three openings to connect angle valve, faucet and hoses/ pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.

Easy Installation
Our product is the component used for connecting, works with your existing plumbing. It is easy to install for water diverting, even in tight spaces.

MULTIPURPOSE
It is a good diverter for you to connect an angle valve(wall mounted) and hoses or faucet; mount on the shower arm to create a dual shower with head shower and hand shower(need an extra shut off valve if you want to switch the water flow). And you can also use it to connect the sprayer hose in the toilet or bathroom to wash your pet and clean things.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

Package include:
4 PCS 1/2″ PEX Tee fitting.
4 PCS 1/2″ PEX coupling fitting.
4 PCS 1/2″ PEX elbow fitting.

Conclusion

By our suggestions above, we hope that you can found tee fitting plastic hot water for you.Please don’t forget to share your experience by comment in this post. Thank you!