infratechplus 
Nowadays, there are so many products of hot water tank drain valve in the market and you are wondering to choose a best one. You have searched for hot water tank drain valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water tank drain valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
House Mods HMP010 Brass 3/4" MIP Water Heater Replacement Drain valve(Full Port, Ball Valve, 2 inch Shank)
- Lead Free Compliant Brass Body, 304 Stainless Steel Ball Valve, 2 inch shank, Fits Water Heater Drain Port up to 1-1/2″ Deep
- FULL PORT BALL VALVE: 19 mm Flow Opening, Fast Drain, Clean out larger debris and easy to unclog
- ENLARGED OCTAGON NUT: Easy to install with a pipe wrench, do not over-tighten.
- HEAVY AND HEAVY DUTY: Net Wight: 0.95 lb.
- BIG HANDLE: Make sure you have enough room to install. NOT for use under freezing temperature.
Contain less than 0.25% lead. Lead Free Compliant. California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
EZ-FLO 60092LF Water Heater Drain Valve
- DIMENSION: 2-1/4 inch Long Shank
- 3/4-Inch MIP Inlet x 3/4-Inch MHT Outlet
- MATERIAL: It is made up of high-quality sturdy brass for durable and leak-free fittings
- DESIGN: This pipe fitting valve is designed for MHT outlet connection which fits directly to water heaters
- USES: It provides a strong compression hold on water heaters, which can be released to drain water while cleaning or replacing elements without making a mess
- APPROVED: This item meets the requirements under the California’s Proposition 65, also known as the Safe Drinking Water and Toxic Enforcement Act and complies with lead-free plumbing laws
Winterize RV, Motorhome, Boat, Camper, and Travel Trailer: Air Compressor Quick-Connect Plug To Male Garden Hose Faucet Blow Out Adapter with Valve (Lead-Free Brass)
- Blowout adapter with shut-off valve to winterize your recreational vehicles (RV), motorhome, camper, boat, watercraft, and travel trailer by blow out method. This is a safer, healthier, and environmentally friendlier winterization tool when compared with those winterizing kits that use antifreeze.
- Flexible hose allows the adapter to access tight spaces and minimizes stress on pipes and fittings. Pre-assembled length: 11.5 inches approx. Pressure rating: 250 psi. 100% outdoor rated, virtually indestructible, impervious to water and oil.
- Hose: Flexible Reinforced Synthetic Rubber, water and oil resistant (Insta-Grip hose, made in USA)
- For your health and safety, the fittings are made of lead-free brass, certified to contain less than 0.25% lead. Always wear safety goggles when handling or using compressed air.
- This winterization tool is made from the highest quality parts. The shut-off valve is made from forged brass (not brass casting) for extra strength and durability. If you are looking for a heavy duty tool that lasts a lifetime, this one is for you! This blowout adaptor may also be used to winterize sprinkler system, drip irrigation system, soaker hose, spigot, faucet, sillcock, water garden hose and hose bibb where applicable. Assembled in Wichita, Kansas, USA with domestic and foreign parts.
A quick and easy way to blow out the water lines of your RV, motorhome, camper, boat, and travel trailer. Winterizing is easy with this blow out adapter. Its 3/4″-11 NH hose threads easily connects to a standard garden hose. Its 1/4″ Industrial Interchange Quick-connect plug is the most common quick-connect fitting for air compressors in North America.
One end of the adapter has a male garden hose faucet/spigot/spout connection which screws directly to the city water inlet on your RV, motorhome, boat or travel trailer. The other end of the adapter has a quick-connect plug designed to connect to most air compressors. If your compressor does not have quick-connect coupler, you can easily remove the quick-connect plug with a wrench to get access to the 1/4″ male NPT (national pipe thread) connection, which is a very common connection. Your local hardware store should be able to help you find the proper adapter to connect the 1/4″ male NPT to your air compressor. The flexible hose allows the adapter to access tight spaces and minimizes stress on your piping and fittings.
We use food-grade vegetable oil and non-toxic plumber’s pipe dope only in the installation process. Most commercially available brass fittings contain up to 8% lead, but for your health and safety, the lead-free brass fittings in this item have been tested by a United States CPSC-Accepted Testing Lab and certified to contain less than 0.25% lead. The manufacturer, Vibrant Yard Company LLC, is a Better Business Bureau Accredited Business.
LASCO 40-0911 Plastic Water Heater Drain Valve with 5/8-Inch Shank 3/4-Inch Male Pipe
Product Description
LASCO 40-0911 Water Heater Drain Valve With 5/8-Inch Shank, 3/4-Inch Male Pipe x 3/4-Inch Male Hose Thread Outlet, Plastic. Plastic water heater drain valve with 5/8-Inch shank. Fits directly into water heater for easy draining. 3/4 male pipe thread x 3/4 male hose thread. For residential water heaters . Easy to install. For residential water heaters .
From the Manufacturer
LASCO 40-0911 Water Heater Drain Valve With 5/8-Inch Shank, 3/4-Inch Male Pipe x 3/4-Inch Male Hose Thread Outlet, Plastic. Plastic water heater drain valve with 5/8-Inch shank. Fits directly into water heater for easy draining. 3/4 male pipe thread x 3/4 male hose thread. For residential water heaters . Easy to install. For residential water heaters .
Camco 11703 1/2" Water Heater Drain Valve
Use the Camco RV 1/2″Water Heater Drain Valve to replace your water heater drain valve. This sturdy brass replacement is easy to install.
Rheem SP12112G Brass Drain Valve
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Body Material: Brass, Shank Length (in.): 2-1/4, Tank Fitting Size – NPT (in.): 3/4, Garden Hose Fitting Size – NHR Nominal (in.): 3/4
- Garden Hose Fitting Size – Actual (in.): 1-1/16, Handle Type: screwdriver
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Rheem SP12039 Poly Drain Valve
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Body Material: Poly, Shank Length (in.): 2-1/4, Tank Fitting Size – NPT (in.): 3/4, Garden Hose Fitting Size – NHR Nominal (in.): 3/4
- Garden Hose Fitting Size – Actual (in.): 1-1/16, Handle Type: Handgrip
- Kits which contain this part: 45W382, SP13266
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Rheem SP12159B Water Heater Round Poly Drain Valve w/Concentric Handle – 3" Length
Rheem SP12159B Water Heater Round Poly Drain Valve w/Concentric Handle 3″ Length
Kenmore 9000254015 Water Heater Drain Valve Genuine Original Equipment Manufacturer (OEM) Part
- This part is compatible with models including
- 153337380,183330111,153336610,183336330,153331960,183339170,153332811,153321351,153321352,153321350,183339710,153339210,153335410,153337710,153331610,153331850,153328410,153338370,153339580,153336510,183336230,15337230,153331860,153331981,183339070,153332711,153321330,153321331,153321332,153339110,153336080,153339470,153335310,183330481,153330781,153319510,183336011,153336130,153339880,183336130,183336810,153311111,153311230,153332211,153336011
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 9000254015,31915,9000254,9000254047,0170001,0170032,017007,017023,017024,150450,31915,3420
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore
- This drain valve (part number 9000254015) is for water heaters
- Disconnect electrical power to the water heater or shut off the gas supply before installing this part
Genuine Original Equipment Manufacturer (OEM) parts! This drain valve (part number 9000254015) is for water heaters. Drain valve 9000254015 opens to let you drain water from the water heater tank. Disconnect electrical power to the water heater or shut off the gas supply before installing this part. Wear work gloves to protect your hands. For Kenmore.
Conclusion
By our suggestions above, we hope that you can found hot water tank drain valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
