infratechplus 
Nowadays, there are so many products of rasberry pie 3 heatsink cooling fan in the market and you are wondering to choose a best one. You have searched for rasberry pie 3 heatsink cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rasberry pie 3 heatsink cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b
- 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 (Not include Pi Board)
- Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Power Supply etc ports
- Specially Come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2.5A power supply with a handy on/off switch on the 1.5m long cable
(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .
Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case
Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)
Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.
(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.
Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A
Similar items with 4 stars and above
GeeekPi Raspberry Pi 3 B+ Cooling Fan, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 3B+ (B Plus)
- Compatible with Raspberry Pi 3 B+（B Plus）
- It’s compatible with most of cases in the market
- Use CNC Machining manufacturing technology for Aluminum heatsink
- With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation
- The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board
- NOTE:Raspberry Pi Board Not Included!
- Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink, 2x Thermal Tapes
Extreme Cooling Fan Kit For Raspberry Pi 3B+
Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.
Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes
iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 30mm Large Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 3 Model B+ / Pi 3B
iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)
- Complete Stackable Clear Acrylic Case Kit for Up To Four Layers
- Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+
- Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi
- With Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
Package Include: 1x 4-Layer Raspberry Pi Case 4x Cooling Fan 4x Raspberry Pi Heatsink Kit 4x Screw Set
Smraza Compatible with Raspberry Pi 4 Fan with 4PCS Aluminum Heatsinks, DC 5V Cooling Fan for Raspberry Pi 4, Fan for Raspberry Pi 4 Model B, 3 B+, Pi 3, Pi 2, Size:30x30mm (Black Fan)
- Cooling fan fits perfectly for Raspberry Pi 4 Model B. Also compatible with Raspberry Pi 3 B+, Pi 3.
- The quiet cooling fan and 4 pcs heatsinks are good for heat dissipation of raspberry pi board.
- The Raspberry Pi 4 fan is easy to install the fan for pi by screws, the heatsinks with adhesive on the back.
- Cooling Fan Size (L x W x H): 30 x 30 x 7 mm.
- 100% CUSTOMER SATISFACTION GUARANTEED – If for ANY reason you aren’t completely satisfied with the fan, please let us know and we will give you a satisfy solution.
Product Description:
1. Fan compatible with Raspberry Pi 4 Model B, Pi 3 B+, Pi 3, Pi 2 Model B.
2. Significantly reduce the temperature of the CPU.
3. Almost without any noise.
4. Stable and big wind force.
5. With screws and screw nuts, easy and simple to install.
Package included:
1) Mini fan x1
2) Aluminum heatsinks x4
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
- Installation instructions video: ★https://drive.google.com/file/d/1n6y5fzvX74SwWc_HFvO6YHhfe32-4vgi/view
- ★https://drive.google.com/open?id=1rx11diEefXeZ3Ig40MzuMXO3-9tdFoo3. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!
- Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!)
- Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging.
- With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don’t need to open the cover. This case is easy to install and has good ventilation.
- With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera(Rpi camera purchase link: https://www.amazon.com/dp/B06XYDCN5N).
Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, Enclosure Box with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
This protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.5inch display;
It provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3.5 inch display.
This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display.
There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don’t need to open the case.
It with a compact design, simple and elegant, transparent environmental protection material.
Package Including:
1 * Raspberry Pi Case
3 * Heat Sink
1 * Mini Cooling Fan with screws
Argon One Raspberry Pi 3 B+ / B Case with Cooling Fan | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music
- SLEEK MULTIMEDIA CASE | This sleek aluminum case not only brings out stunning aesthetics, but it’s also highly functional by protecting the Raspberry Pi from harm and being usable for pastimes such as retro gaming, watching movies, or even playing music. This case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Similar items with 4 stars and above
Raspberry Pi Fan, iUniker RGB Cooling Fan Raspberry Pi Ice Tower Cooler, Raspberry Pi Cooling Fan, Raspberry Pi Heatsink Fan for Raspberry Pi 4b/ 3b+/ 3b
- DC 5V Power in (Can be powered by the Raspberry Pi)
- Super Cool RGB fan background light (Multicolor)
- 5mm copper tube
- Super heat dissipation
- In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
- This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem!
Description：
– According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex. Higher processing performance will generate more heat.
– This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem!
– Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
– In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
– Best of all, this super cooling fan support both Raspberry Pi 3 and the new Raspberry Pi 4.
– When the fan turns up, you will see the color of ice. Blue LED lights show the concept of ice, It’s the origin of its name.
Aukru Raspberry Pi 3 b+ Case Raspberry Pi 3 b+ Fan Raspberry Pi 3 heatsink kit for Raspberry Pi 3 Model B Accessories Pi 2 Model B + Raspberry Pi 3 b+ Case, Cooling Fan, Heat Sink Raspberry Pi 3 b+
- Aukru RASPBERRY PI SET – Clear Case + Cooling Fan + Heatsink for Raspberry Pi 3 model b & Pi 2 model b +
- COOLING FAN INCLUDED! Mini 3x3cm DC 5v 0.2A fan give your Raspberry Pi CPU excellent cooling and ventilation with our easily attachable Pi Fan. This fan will replace the hot air in the case with fresh cool air keeping your temperatures lower. Fan is attached with four metal screws (supplied) to case
- THIS CASE USES STRENGTHENED PLASTIC – That Is 2 Piece Injection Moulded And Snaps Together Holding Your Raspberry 2 & 3 Firmly In Place With Four Metal Screws
- EASY ACCESS TO ALL PORTS – With Access To Raspberry Pi 3 & Pi2 Consumer Ports and Camera To Easily Connect Your Raspberry Pi Kit
- Notice: Raspberry Pi Board is Not Included
Aukru Raspberry Pi Clear Housing Transparent Cover Shell Cooling Fan Cooler Heatsink for Raspberry Pi 3 / 2 model b
Specification:
Housing Case:
Color: transparent
Contents: with screws, a screwdriver and four non-slip mats to fix the Raspberry Pi
Cooler Fan:
DC 5V 0.2A
3 x 3 cm balck with metal screws
Easy to install
Heatsink:
Adhesive paste down heatsink to cool the temperature
3pcs Heatsink Sets: 2x alminum heatsink; 1x copper heatsink
installation steps:
1, please put the pi module tilt,
2, when the hdmi port/micro usb port aligned with the corresponding hole,
3, put the module in the case.
Warning:
The raspberry pi 3 has exactly the same shape as a raspberry pi 2. The heatsinks are on top of the board, one on the CPU, one on the GPU, do not need to put heatsink on the component underneath The card, you may not be able to insert the card into its case
Package include:
1 x Aukru tansparent case
1 x Aukru cooling Fan
1 x 2 Aluminum Heatsink + 1 Copper Heat Sink
Smraza for Raspberry Pi 3 B+ Case with 5V 3A Power Supply with On/Off Switch, Fan Cooling and Heatsinks, Case Compatible with Raspberry Pi 3 Model B+, 2B, 3B Plus(Black)
- Smraza Acrylic Case fits for Raspberry pi 3 B+ 3 Model B, easy assembly with instructions.
- 1pc Mini Fan + 3pcs Aluminium heatsinks are included.
- 59 inch Power Cable w/ switch button – Just Press button to turn on/off your pi, convenient to use.
- 5V 3A Power Supply – Power for all versions of Raspberry pie and other USB device.
- Enough mount for pi 3b+/3B/2b ports – Case allow sd card, ribbon cable and other GPIO connectors in.
Smraza for RPi 3 B+ black case for Rapberry pi 3,2 model b, classic case for RPI and it protects your pi safe well.
About Updated Case Kit:
1. For the customer expections, this updated 9 layers case with only 2 pieces plastic films on(the top and the bottom pieces), it save time time to remove all pieces films.
2. Two black larger aluminum heatsinks(14mm x 14mm x 6mm) + One small heatsink (9mm x 9mm x5mm) could be cool down the Pi board better.
Note:
1. Before you assemble this case, please read our case instruction and remove the protective films.
2. This product does not include the Raspberry pi board.
3. This case is not compatible with Asus tinker board due to the design difference.
Package Included:
1) black case x1
2) heatsinks x3
3) 5V/3A Power supply adapter x1
4) Cable length:5ft/(1.5 meter) x1
5) Mini fan x1
About Smraza:
We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. If you have any questions about our product, please feel free to contact us to get technical support and services by Buyer Message or Q&A .
Related Items:
Smraza GPIO Breakout Board + Jumper Wires + 830 Points Breadboard: http://a.co/0h8fGJf
Camera Module for Raspberry Pi 3: http://a.co/9SGv32W
Conclusion
By our suggestions above, we hope that you can found rasberry pie 3 heatsink cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
