The 9 Best Water Cooling Complete Kits

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

When looking for a complete DIY liquid cooling solution, the Thermaltake Pacific RL120 DIY Water Cooling Kit is now here. As a all-in-one Liquid cooling combo kit, Thermaltake provides everything needed to add exceptional performance to your CPU with a DIY style all together. Gain freedom to display and secure your cooling components in endless configurations for a one of a kind presentation. Take your cooling to the next level with the Thermaltake Pacific RL120 DIY Water Cooling Kit.

Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

With the new Eissturm sets you get all the components you need for your start into the world of water cooling. The sets are not only for beginners but also for professionals. All components used are optimally matched and come from Alphacool’s high-end series. Alphacool makes no compromises when it comes to materials and relies on pure copper or brass for all metals. This guarantees outstanding cooling performance. With the set you can easily cool your CPU and you can also integrate any graphics card cooler into the circuit. Thanks to the enclosed quick-release fastener, they do not have to empty or modify the circuit.

Barrow ABS 16MM Hard Tube Bending Kit, Black

Model: AWGM3-16

The Alphacool Eiskoffer is perhaps the most comprehensive collection of tools for bending 13mm or 16mm diameter HardTubes into nearly any form ever assembled. Inside the large, elegant, and sturdy case, each tool has its own separate place. All the tools are clearly arranged and neatly organised. The rubberised gloves ensure you always have a good grip on things, while also protecting you from splinters and dirt. The deburring tool is perfect for smoothing down HardTubes. Deburring is mandatory if you want the HardTubes to fit into their connectors properly. A long, sturdy saw and a mitre box serve to simplify cutting the HardTubes. The mitre box can be fastened to a table edge with special screw clamps, which are included. The inside of the mitre box is rubberised to prevent scratches and to keep the HardTubes from sliding around. The comprehensive set of measuring tools makes it easy to measure not just length, but also two or more angles at the same time. This tremendously simplifies the planning and execution of complicated bending sequences. In order to get the perfect bend each time, a substantial palette of bending radii and angles can be attached to the bending plate. The basis for this is formed by two different sizes of bending mandrels and arc mandrels. This allows you to bend HardTubes to any classic bending radius. The fitting stoppers can be used to simulate the depth of an Alphacool fitting on the end of the tube. This means an exact measurement and a perfect bend are always guaranteed when using Alphacool products. Alternatively, the straight mandrel with a stylus stopper can be used if you are using other products. The bending plate has a section that can accommodate self-designed or highly specialised bends. The case contains special flex mandrels that can be positioned in nearly any way. Model: 29131.

Thanks for Shopping in our Amazon Store, we are a professional business company, we WMN_TRULYSTEP have engaged in online business for about 8 years, we always providing the best products and the best service !

This set of moonshine stills is a complete wine making sets, great alembic still for beginners or expert distiller,portable and easy to handle. and We have test everything when we sending the package out.
We have continuously improved our products over the past years to make it easier for customers to use our distillation equipment.Fermenter pot is more 25% Thicker,There are 2 ajustable stainless feet under the cooling pot,can make sure the cooler stand on the fermenter pot steadily;embeded stainless buckle on the fermenter pot, and the integral seal O-ring,has a better effect on sealing

Boiler Material: stainless steel.
Cooling pipes material: top grade red copper or stainless steel.
The cooling coil cooler: copper or stainless steel pipe to shape.
Length: 170cm/ 67 inches for 2 or 3 Gal, 250cm / 100 inches for 5 or 8 Gal.
construction: The construction is all Stainless steel which has been argon welded thus avoiding any of the health problems associated with copper and solder constructed stills.
Welding technique: The item is argon welded to avoid any of the health issues associated with welding and solder constructed alcohol stills.
Heat source: induction cooler, stove, or any other heating sources are OK!
★You will need (NOT include) : yeast,water supply,heat source(I suggest use induction cooker or gas stove) , all the items are the same the pictures showed , Contact me anytime when you need additional help.
★NOTE！★: you can NOT use the water-pump when making wine, because it is hard to control the flow of the water, but you can use the house tap, or manually, Normally, buyer from USA can receive the products within 7~10 working days.

Aisin takes pride in being the number one water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of co-operation directly with automotive manufacturers, Aisin is able to employ a technological advantage in manufacturing and supplying of the best in quality and the most durable of products. With this momentum, Aisin is increasing the development, manufacturing and supply for European and American automobile manufacturers. Aisin water pumps provide optimal cooling without creating excess load to the engine, and the advanced aluminum die-cast technology allows for size and weight reductions without sacrificing cooling performance. The highest quality materials are used, creating stronger body design and resistance to corrosion. Advanced technological design produces smooth coolant flow channels, efficient rotors, ball bearings, and carbon ceramic mechanical sealing for optimum cooling performance and longevity. Aisin is a leader in the development and production of high-quality original equipment matched components and systems for the automotive industry.

Conclusion

By our suggestions above, we hope that you can found water cooling complete kits for you.Please don’t forget to share your experience by comment in this post. Thank you!