Best Thermoelecric Cooling Kit

Great idea for pet cooling in hot summer, such as chicken, little dog. Can used for plate cooling, pet bed cooling, test bench, small space cooling.

Specification:

-Material: Aluminum
-Power Supply: DC 12V
-Power Cnsumption: 72W
-Size: Approx. 120 * 100 * 80mm / 4.7 * 3.9 * 3.1inch

Package Included:  
1 x Cooling System Kit

Specification:
Material: aluminum + plastic fan
Rated power: 120W
Voltage: 12V
Current: 10A

Package Includes:
1 x Dual-core Semiconductor Refrigeration Cooling chip: TEC1-12706 Size: 200 * 120 * 100mm/7.87 *4.72 * 3.93 inch

Features:

Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc. Simple operation, good practicability. Cooling quickly, outstanding effect. Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.

Specifications:

Working current: 6A

Working voltage: 12V

Can also use 12V 10A power supply, frozen fast.

Power: 72w

Size: 175 * 100 * 98 mm/6.88 * 3.93 * 3.85inch

Package Included:

1 x Semiconductor Refrigeration

40mm Fan Heatsink Kit, Cooler Heat Sink + 12V Fan + Silicon Thermal Tape + Grill Screw Mounting Kit for Cooling 3D Printer, TEC1-12706 Thermoelectric Peltier. Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc silicone pad, 1 metal grill, screw monthing screw nut set. Fan dimension: 40x40x10mm, 12V DC, wire 2-pin-2.5mm connector 5.9″/15cm, speed: 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC

With the wide applications of semiconductor cooling, more and more DIY enthusiasts are interested in it. It's a question that how to make refrigerating capacity to a more great extent in water cooling applications. This DIY kit could be just to your taste. 

Note:
1. The conduction cool module can frost when the temperature is under -25°C.
2. TEC1-12706: one side with words is the refrigeration side, the other side is heat dissipation side.
3. Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier.
4. The DC power is not included in this kit, please prepare it by yourself.

Specifications:
Semiconductor Chilling Plate: TEC1-12706
Size: 40 * 40 * 3.75mm
Internal Resistance: 2.1~2.4Ω
Max. Temperature Difference: 67°C Above
Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
Working Current: Imax.=4~4.6A(Rated 12V)
Refrigeration Power: Max. 50~60W
Working Environment: -55~83°C
Sealing Process: Standard 704 silicon rubber sealing all sides
Fan: DC 12V 
Conduction Module: 60 * 45 * 21mm
Water Block Size: 40 * 40 * 12mm
Fan Size: 40 * 40 * 10mm
Package Size: 12 * 9 * 7cm / 4.72 * 3.54 * 2.75in
Package Weight: 284g / 10.02oz

Package List:
2 * Conduction Module
1 * Water Block
2 * TEC1-12706
2 * Thermal Grease
2 * Fan
1 * Base Board
1 * Pack of Screws

This is a dual-core semiconductor refrigeration thermoelectric peltier air cooling dehumidification equipment DIY kit. This thermoelectric cooler goes along for the small volume cabinet and works stably and effectively. It is a great product for electronic enthusiasts in DIY semiconductor cooling system. With this kit, you can make cooling system for yourself conveniently.

Specifications:
Power: 144W
Power supply: 12V 15A (not included)
Size: 175×175×96mm/6.89×6.89×3.78inch

Package Includes:
1× 40 * 40mm fan
1×Acrylic sheet
2 set×fixtures
2×12706A chilling plate
1 set×nuts
2sets×2 tubes radiator(containing 3pcs 9025 fan 3 +2 pcs 2 tube radiator 2 + 8 pcs fan fasteners )

Note:
1.The package does not include power supply
2.It is not possible to cool the room or use it as a room air conditioner

With the wide applications of semiconductor cooling, more and more DIY enthusiasts are interested in it. It's a question that how to make refrigerating capacity to a more great extent in water cooling applications. This DIY kit could be just to your taste.

Features:
Adopt TEC1-12706 semiconductor chilling plate, good quality for use.
Complete sealed structure, isolating the moisture in the air.
Higher reliability than others.
Include 1*TEC1-12706, 1*conduction cool module, 1*water block, 1*fan, 1*thermal grease, 1*base board and a pack of screws.
Lightweight and mini in size, easy to install.
Great DIY kit for electronic enthusiasts in semiconductor cooling applications.

Note:
1. The conduction cool module can frost when the temperature is under -25°C.
2. TEC1-12706: one side with words is the refrigeration side, the other side is heat dissipation side.
3. Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier.
4. The DC power is not included in this kit, please prepare it by yourself.

Specifications:
Semiconductor Chilling Plate: TEC1-12706
Size: 40 * 40 * 3.75mm
Internal Resistance: 2.1~2.4Ω
Max. Temperature Difference: 67°C Above
Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
Working Current: Imax.=4~4.6A(Rated 12V)
Refrigeration Power: Max. 50~60W
Working Environment: -55~83°C
Sealing Process: Standard 704 silicon rubber sealing all sides
Fan: DC 12V
Conduction Module Size: 60 * 45 * 21mm
Water Block Size: 40 * 40 * 12mm
Fan Size: 40 * 40 * 10mm

Package List:
1 * Conduction Module
1 * Water Block
1 * TEC1-12706
1 * Thermal Grease
1 * Fan
1 * Base Board
1 * Pack of Screws

Rated Power: 144W

Voltage: 12V

Current: 12A

weigth:900g

cooling chip: TEC1-12706(6A 12V 72W)

this cooling system suit for Small 10-30 liter space.

Pakcage includes switch power supply(12V 12A)

Package includes:

1pcs x Thermoelectric Peltier Cooler

1pcs Power supply

Conclusion

By our suggestions above, we hope that you can found thermoelecric cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!