The 10 Best 3M Lead Based Paint Dust Cartridge

The 3M Mold Remediation Respirator Kit 69097 includes one large sized 3M Full Face piece Reusable Respirator 6900 plus 2 pair (4 total) 3M Particulate Filters 2097. The 3M Particulate Filter 2097, P100, helps provide respiratory protection against exposure to mold, lead, asbestos, cadmium, arsenic, and MDA (methylenedianiline). This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. The 3M Full Face piece Reusable Respirator 6000 Series is a lightweight, well-balanced, full face respirator design with silicone face seal for enhanced comfort and durability. The 3M Cool Flow Valve helps make breathing easier. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Face piece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Face piece Reusable Respirator 6000 Series face piece also meets the impact requirements of the ANSI Z87. 1-2010 standard, high impact level for face and eye protection. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

NIOSH approved for environments containing certain oil and non-oil based particles.

Product Description

NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

Lead paint removal respirator, 3M recommended for sanding & scraping lead based paints, balanced design for more comfort, individually packaged, niosh approved: P100.

From the Manufacturer

3M Reusable Dual Cartridge Respirators are designed and constructed for exceptional performance and comfort that lasts. The face-pieces are designed to provide outstanding comfort and fit. The sweptback cartridges improve visibility and the face-pieces can be easily disassembled for cleaning. They are NIOSH approved.

NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapours and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone. Use with 3M Respirators 5000 Series or 3M Cartridge 6000 Series with 3M Adapter 502, 3M Facepieces 6000 Series or 3M Facepieces 7000 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode.Refer to specific provincial regulation for appropriate assigned protection factors for full face respirators. Also offers nuisance level relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or in environments that are immediately dangerous to life or health (IDLH).

Product description

3M 6100 Half Facepiece Reusable Respirator

From the Manufacturer

The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.

NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M 6000 Series Half Facepiece Reusable Respirator
	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Organic Vapor Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100	3M Mercury Vapor Chlorine Gas Cartridge/Filter P100	3M Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

Uses a variety of innovative features to help you meet your respiratory protection and comfort needs.

Product Description

Protect Your Lungs Without Hindering Your Ability To Get The Job Done! Made By 3M, The Protection Professional Multipurpose Respirator Weighs Just Over A Pound Yet Filters At Least 99.7% Lung Protection From Mold, Lead And Dangerous Airborne Sprays From Coatings And Sealants. Use It In Your Shop Or On The Job And Work With Confidence. Made In Usa.Technical Details: Lightweight Design Won’T Hinder Your Ability To See Or Get Work Done Protects Your Lungs From Particles Related To Mold, Lead, Coatings, Solvents, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride Or Hydrogen Sulfide Ideal For Workplace/Occupational Applications Delivers At Least 99.7 Percent Filtration Efficiency Against Particles (Including Oil) Low Profile Cartridges Won’T Obscure Your Vision Replaceable Cartridges Are Niosh Ov/Ag/P100 Approved 9.25″H X 9.55″W X 5.6″W Weighs Just Over 1 Lb. Made In Usabest Used With: 3M Protection Professional Multipurpose Respirator Replacement Cartridges (#43259)3M Protection Professional Faceshield With Ratchet Adjustment (#43262)Coleman Powermate&Reg; High Volume Low Pressure Spray Gun (#42758)

From the Manufacturer

3M Reusable Dual Cartridge Respirators are designed and constructed for exceptional performance and comfort that lasts. The face-pieces are designed to provide outstanding comfort and fit. The sweptback cartridges improve visibility and the face-pieces can be easily disassembled for cleaning. They are NIOSH approved.

3M Tekk Protection 27 Pack Respirator Cool Valve Filtering Facepiece Particulate Respirator N95 Lightweight Comfortable “M” Nose Clip Recommended For Sanding & Preparation Before Painting NIOSH Approved: N95

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m lead based paint dust cartridge, eg:

• What are Top 10 3m lead based paint dust cartridge for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m lead based paint dust cartridge to buy?
• What are Top Rated 3m lead based paint dust cartridge to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m lead based paint dust cartridge?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m lead based paint dust cartridge.
• Before deciding to buy any 3m lead based paint dust cartridge, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m lead based paint dust cartridge and What you should consider when buying the 3m lead based paint dust cartridge and Where to Buy or Purchase the 3m lead based paint dust cartridge. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m lead based paint dust cartridge of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m lead based paint dust cartridge.

Conclusion

By our suggestions above, we hope that you can found 3m lead based paint dust cartridge for you.Please don’t forget to share your experience by comment in this post. Thank you!