infratechplus 
Nowadays, there are so many products of 3m glue guns in the market and you are wondering to choose a best one. You have searched for 3m glue guns in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3m glue guns which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
31,485 Reviews Scanned
![3M (Polygun-TCw/.090"Tip) Hot Melt Applicator TC [You are purchasing the Min order quantity which is 1 Each]](https://infratechplus.com/wp-content/uploads/2020/03/fb7f25eb60614a378c88385a10eeabc0.webp)
3M Poly Gun TC Glue Applicators with 150 W(LY101)
Item #: GL3MTCQ. 3M Poly Gun Glue Applicators feature quad rack converter and palm trigger. Heats up to 385 degrees F. Delivers up to 2. 6 pounds of adhesive per hour. 150 watts. 120 volts. customers also search for: Glue Guns, Hot Glue Guns, Glue Applicators
3M 3792LM-TC-5/8-2 Hot-Melt Adhesive – Multipurpose, Non Corrosive Hot Glue Stick.
- Glue Gun Stick: the 40-50 second open bond of this hot glue stick ensures appropriate positioning. It helps reducing the time consumed in POP production, as it bonds almost instantly
- Multiple Usage: the hot glue can be used for fitting adjustment on polyethylene, corrugated boxes, polypropylene, and wood. It can also be used on lightweight substrates of furniture and upholstery
- User-Friendly: this melting glue has been qualitatively manufactured using 100% solids and thermoplastic resin. This glue stick is a low-volatile-organic-compound that does not produce much odor when heated
- Melting Point: the low melt adhesive has comparatively lower melting point, ranging between 170 – 250 deg. F (76 – 121 deg. C) approximately. It can be used with low-temperature applicators like hot glue guns
- Specifications: the melting glue stick weighs 1 lb. and measures 5/8 in. x 2 in. Use it with 3M Hot Melt Applicator LT, LT Quad rack or EC according to the version
3M 3792Q Hot-Melt Adhesive is a multiuse bonding stick that is an ideal solution for fitting adjustment on corrugated boxes, polyethylene, polypropylene, and wood. It is manufactured from 100% solids and thermoplastic resin. The hot melt glue stick does not produce pungent odor when heated and has a lower melting point (76 – 121 deg. C approximately). It has a 40-50 second open bond that allows for right positioning. It is best to use this adhesive stick with 3M Hot Melt Applicator LT, LT Quad rack or EC as per the version.
3M Hot Melt Adhesive 3792 LM Q, Clear, 5/8 in x 8 in
- General purpose 100% solids adhesive
- 50 second open time allows for adjustment and positioning
- Ideal for POP displays, carton sealing, furniture, upholstery, and woodworking
- Versatile product works for electronic and electrical wire bundling
- Ribbed contour interlocks with the Quadrack converter for non-slip feed and consistent dispensing
- Dries clear for clean appearance
- Open bond time allows for fit adjustment and positioning
- 3792: Clear, multi-purpose for wood, fabric, upholstery, and other lightweight materials
- 3792LM: Low melt version for heat sensitive surfaces such as coated paper and P.O.P displays
- Excellent “Go-to” adhesives for POP display, carton sealing, furniture, upholstery, and woodworking
Product Description
3M Hot Melt Adhesive 3792 is a clear, multipurpose adhesive for effectively bonding wood, lightweight metals and some plastics in furniture, upholstery and woodworking applications.
From the Manufacturer
This multi-purpose adhesive features a 40 – 50 second open bond, to allow for positioning and fit adjustment on wood, polyethylene, polypropylene, corrugated boxes, and lightweight substrates on furniture, upholstery and novelties. Its nearly instant bonding property reduces production time for POP assembly, joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, and packaging.
3M Hot Melt Adhesive 3792 is manufactured with 100% solids, thermoplastic resin for use with either the 3M Scotch-Weld Hot Melt Applicator LT, LT Quadrack or EC, depending on version. It is a low-volatile-organic compound (VOC) and produces minimal odor when heated, helping to support a comfortable work environment. This thermoplastic adhesive has excellent thermal shock, heat resistance, electrical insulating properties, and is non-corrosive.
About Hot Melt Adhesives
Hot melt adhesives/hot-glue sticks have a relatively hot melting point that ranges between approximately 250 – 380°F (121 – 196°C), depending on the formulation, and are applied with hot-melt applicators, commonly referred to as hot-glue guns. Hot-melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick-stick nature of hot-melt adhesives speeds up operations in packaging and production.
Low melt adhesives/ hot-glue sticks have a relatively low melting point that ranges between approximately 170 – 250°F (76 – 121°C), depending on the formulation, and are applied with low-temperature applicators, commonly referred to as hot-glue guns. Low-melt adhesives are beneficial in that they can be used to bond heat sensitive materials such as foam and a range of plastics. They provide a nearly instant bond but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated.
This multi-purpose adhesive features a 40 – 50 second open bond, to allow for positioning and fit adjustment on wood, polyethylene, polypropylene, corrugated boxes, and lightweight substrates on furniture, upholstery and novelties. Its nearly instant bonding property reduces production time for POP assembly, joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, and packaging.
3M Hot Melt Adhesive 3792 is manufactured with 100% solids, thermoplastic resin for use with either the 3M Scotch-Weld Hot Melt Applicator LT, LT Quadrack or EC, depending on version. It is a low-volatile-organic compound (VOC) and produces minimal odor when heated, helping to support a comfortable work environment. This thermoplastic adhesive has excellent thermal shock, heat resistance, electrical insulating properties, and is non-corrosive.
About Hot Melt Adhesives
Hot melt adhesives/hot-glue sticks have a relatively hot melting point that ranges between approximately 250 – 380°F (121 – 196°C), depending on the formulation, and are applied with hot-melt applicators, commonly referred to as hot-glue guns. Hot-melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick-stick nature of hot-melt adhesives speeds up operations in packaging and production.
Low melt adhesives/ hot-glue sticks have a relatively low melting point that ranges between approximately 170 – 250°F (76 – 121°C), depending on the formulation, and are applied with low-temperature applicators, commonly referred to as hot-glue guns. Low-melt adhesives are beneficial in that they can be used to bond heat sensitive materials such as foam and a range of plastics. They provide a nearly instant bond but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated.
The aggressive hot tack nature of low-melt adhesives speeds up production and assembly operations that involve light gauge metals, some plastics, and other non-fibrous materials in addition to building display boards, floral displays, and hobby projects. These adhesives are also used in manufacturing, assembly and packaging processes, window, door, construction, transportation, electronics, and other industries, as well as in woodworking, assembling building store displays, convention sample boards, trophies, novelties, upholstery, furniture, audio components, and cabinets.
The aggressive hot tack nature of low-melt adhesives speeds up production and assembly operations that involve light gauge metals, some plastics, and other non-fibrous materials in addition to building display boards, floral displays, and hobby projects. These adhesives are also used in manufacturing, assembly and packaging processes, window, door, construction, transportation, electronics, and other industries, as well as in woodworking, assembling building store displays, convention sample boards, trophies, novelties, upholstery, furniture, audio components, and cabinets.
3M Manual Cartridge Applicator, 08571, 200 mL
- Maximum time and cost efficiency during small or spaceintensive adhesive applications
- Designed for use with smaller cartridges from 375 mL to 400 mL, ideal for oneoff jobs
- Premixes twopart adhesives right from the cartridge, saving time and money
- Manual application no extra equipment required, maximizing efficiency on individual repair orders
- Works with 1:1 and 2:1 3M cartridges to dispense a variety of bonding agents, increasing shop capability
Our 3M Standard, Performance and Premium Manual Applicators provide fully portable application of 2-part adhesives for auto maintenance and repair jobs. Designed for use with 3M cartridges as small as 37.5 mL, these applicators dispense correctly mixed two-part bonding agents with no measuring – maximum efficiency on individual repair orders or where very little space or equipment is available.
3M Static Mixing Nozzle, 38191, 50 mL, 12 per bag
3M Static Mixing Nozzle is a cascade mix/meter nozzle for an easy squeeze of adhesive right on target. Engineered for use with 3M 50mL cartridges.
3M (Polygun-TCw/.090"Tip) Hot Melt Applicator TC [You are purchasing the Min order quantity which is 1 Each]
Dispenses Up to 3.5 Pounds of Hot Melt Adhesive per Hour Our 3M(TM) Hot Melt Applicator TC uses 120V /150W power to maintain a 385??F (196??C) temperature for consistent, reliable dispensing of 5/8″ x 2″ TC hot melt adhesives. We built this lightweight applicator (only 10 oz.) for ease of use, with the on demand feed control helping minimize hot melt waste and dripping. Recommended Applications Small joint assembly Mounting and trim attachment Point-of-purchase displays Trade exhibits Understanding Hot Melt Applicators Hot melt adhesive applicators, commonly called “glue guns,” are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250?? F (121??C) and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380??F (193??C) and can dispense adhesives that produce a stronger bond than low-temperature adhesives. Melted adhesive is extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.
3M 08571 Standard Manual Applicator Gun
- Maximum time and cost efficiency during small or space-intensive adhesive applications
- Designed for use with smaller cartridges from 37.5 mL to 400 mL, ideal for one-off jobs
- Premixes two-part adhesives right from the cartridge, saving time and money
- Manual application – no extra equipment required, maximizing efficiency on individual repair orders
The #3 UniBit Step Drill has 9 holes from 1/4″ to 3/4″ hole sizes with increments of 1/16″; shank size is 3/8″. Each UniBit step drill has an easy-to-sharpen, non-skid tip which eliminates skidding and the need for center punching; the tip gives sure starts even on curved surfaces. The single-fluted cutting edge that you will find on the UniBit step drills helps assure true round holes and allows greater control. They are constructed of industrial grade high speed steel and heat treated to assure maximum durability. The UniBit step drill has 3 flatted shanks, which prevents slipping in drill chuck. The multiple steps on each UniBit eliminates the need to maintain a toolbox full of specific size drill bits. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3M 3738Q Hot Melt Adhesive – 5/8 in. (D) x 8 in. (L) Solid Glue Stick with Thermoplastic Resins, Strong Bond, Quick Drying Adhesive
- Functionality: thermoplastic resins of this solid adhesive stick melt down to stick to the surface. Heat-activated adhesive allows an extended open time for application and positioning, making sure the adhesive-coated substrate is properly fixed
- Quick Adhesion: thermoplastic adhesive quickly fills the gaps between bonding surfaces as it liquifies on heating. This allows you to move assemblies immediately, eliminating the need of clamps, fixturing, or additional drying time
- Applications: the hot-melt adhesive bonds to a variety of substrates like foundry sand cores, wood bonding, selected plastics, chipboard, etc. The bonding adhesive is used for woodworking, furniture, transportation, and other construction applications
- Strong Bonding: melting glue offers a strong, reliable bond for enhanced durability and exceptional performance. The glue stick is the perfect replacement of mechanical fasteners and sealing tapes as it gets virtually invisible between the surfaces
- Specifications: the melt-hot glue stick measures 5/8 in. (diameter) x 8 in. (length) and weighs 1 lb.
Be it any surface or application, 3M 3738Q Hot Melt Adhesive is a reliable choice for quick bonding and adhesion. The heat-activated adhesive is made using solid thermoplastic resins that melt down instantly on heating. Use this glue stick to bond foundry sand cores, wood bonding, selected plastics, polystyrene foam, floral displays, coated paper stock chipboard, etc. With its quick bonding action, the melting glue allows the surfaces to reach their bonding strength immediately, thus eliminating the additional drying time. The thermoplastic adhesive is used for woodworking, furniture, automotive, transportation, aerospace military, window, door, building, and other construction applications.
3M Hot Melt Adhesive 3762 LM Q, Light Amber, 5/8 in x 8 in
- Aggressive hot tack rapidly achieves handling strength
- Short open time allows for fast assembly lines
- Securely bonds difficult to seal substrates such as lightly waxed surfaces
- Low viscosity prevents stringing even at fast production speeds
- Can be used for Assembly, assembling joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, gluing, packaging, adhering, and closing
- Aggressive hot tack rapidly achieves handling strength for packaging and other applications
- Medium open time allows for positioning and fit adjustment
- Securely bonds difficult to seal substrates such as lightly waxed surfaces
- Virtually invisible when bonded, eliminating unattractive mechanical fasteners and tape products
- Bonds to corrugated or paperboard cartons, wood, particle board, chipboard and cushioning foams
Product Description
3M Hot Melt Adhesive 3762 is a 100% solids, fast-setting hot melt adhesive designed for packaging and shipping applications. It is ideal for bonding corrugated fiberboard cartons, wood, particle board, chipboard and foam.
From the Manufacturer
Keep Production Flowing
3M Hot Melt Adhesive 3762 is formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated and other fibrous substrates. It provides strong shear strength and low peel strength, which means your packages stay sealed and components stay bonded under most conditions.
Economical and Safe
A 30 second open time, along a 1/8″ bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for packaging, woodworking, and applications that involve fibrous materials. We manufacture this product using 100% solids, thermoplastic resin for use with our 3M Hot Melt Applicators. As a low-volatile-organic (VOC) compound, this adhesive produces minimal odor when heated and helps support a comfortable work environment.
Recommended Applications
- General packaging
- Recouperage
- Repacking chipboard
- Point-of-Purchase
- Beadboard
- Displays
- Woodworking
- Trade exhibits
- Foam inserts
- Craft applications
- Bonding waxed surfaces
The Hot Melt Advantage
Hot-melt adhesive applicators, commonly called “glue guns” are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F/ 121°C and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F/ 193°C. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Nozzles can be changed to dispense adhesive in a manner that meets various requirements; from a thin, wide strip for carton sealing, to a narrow, thicker bead for bonding wood, composites, or metal. Nozzles are typically metal and become extremely hot during use, which can quickly burn skin. Once dispensed from the applicator, the adhesive generally sets quickly, in most cases just a few seconds. Hot-melt applicators are widely used in industry, crafts, home, and work with materials ranging from paper and lace to wood and some metals.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3m glue guns, eg:
- What are Top 10 3m glue guns for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3m glue guns to buy?
- What are Top Rated 3m glue guns to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m glue guns?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m glue guns.
- Before deciding to buy any 3m glue guns, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3m glue guns and What you should consider when buying the 3m glue guns and Where to Buy or Purchase the 3m glue guns. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3m glue guns of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m glue guns.
Conclusion
By our suggestions above, we hope that you can found 3m glue guns for you.Please don’t forget to share your experience by comment in this post. Thank you!
